Fiem Cip Cip 28-40: Accessories and Spare Parts

Fiem Cip Cip 28-40 Esploso Ricambi

Original FIEM Spare Parts for CIP CIP 28 and CIP CIP 40 Incubators

All that's missing is that little piece to get your FIEM CIP CIP 28 or 40 back on track. The CIP CIP series, FIEM's historic entry-level model since 1978, has accompanied generations of poultry farmers thanks to its robustness and simplicity. Don't let a component hold you back: here you'll find all the original spare parts with immediate availability and direct shipping from Guanzate.

📱 Do you have a question about the code? Write to us on WhatsApp +39 3518819586. Our staff will identify the correct spare part: send us 3 photos (complete machine + data plate + part to be replaced + description of the problem) and we will immediately confirm the code and availability.

⚠️ FIEM CIP CIP 28 and CIP CIP 40 compatibility – Spare parts for these models are NOT automatically interchangeable with other FIEM models (Smart, Inca, Cosmo, etc..., unless expressly indicated in the product sheet. C

🔧 Spare Parts for CIP Component CIP 28 / CIP CIP 40

🌡️ Temperature and Humidity Control

⚡ Before replacing electrical components: Turn the incubator off → wait 60 seconds → turn it back on. This simple "power cycle" solves many apparent problems without having to replace anything.

MiniLED Advanced Thermostat (cod. MINILED ADVANCED) – Digital control unit complete with T/H probe, precision 0.1 °C, 3-digit display with integrated humidity display
Temperature Probe (code SONDA T. LCD old) – Digital sensor for precise thermoregulation
SHT31 Temperature/Humidity Probe (code SHT31) – Combined sensor with case, compatible with EvoPlus and MiniLED systems
Complete T/H Probe (cod. COMPLETE T/H PROBE) – Sensor kit with cable and case, ready for immediate installation
Alcohol Thermometer °F (cod. 05/A) – Precision analogue thermometer for visual control of internal temperature
ABS Thermometer Holder (clip code T/H) – Fixing clip to correctly position the thermometer in the middle of the eggs

🔄 Automatic Egg Turning System

💡 Practical advice: If the egg turner becomes stuck, always check that the disc pin is correctly inserted into the grill bracket before considering replacing the gear motor.

Gearmotor 117/F (code 117/F or F117M) – Single motor for automatic voltage, also compatible with Smart, Cosmo, Inca, MG 50
Plastic Joint (code F117M) – Connection between gearmotor and egg turning grid, subject to wear over time
Adjustable Egg Turning Grid CIP CIP 40 (code 173B) – Door structure. (inserts sold separately)
CIP Metal Inserts CIP 28 (code INSERT.CIP28) – Adjustable separator inserts for eggs of different sizes
CIP Metal Inserts CIP 40 (code INSERT.CIP40) – Adjustable separator inserts for eggs of different sizes

🔥 Heating and Ventilation

R75E Heating Resistance (code R75E) – Silicone cable 2.06 m, 245 Ohm/m, power 95 W for CIP 28 (130 W for CIP 40)
Support Resistance (code 121580COLLARI) – Metal collar for fixing heating cable to the structure
Fan Motor 37/A (cod. 37/A) – Internal fan for uniform heat distribution
CIP Fan Support (cod. SUPP.VENT.CIP) – Metal fan support bearings (only CIP 40)
Fan Protection Net (code RETE CIPCIP40) – Metal safety grille to protect the fan

💧 Humidification and Plumbing Accessories

CIP 28 Humidity Tray (cod. 350 TOP) – Water evaporation tray, standard capacity
CIP 40 Humidity Channel (cod. CANALETTA) – 2-compartment basin for progressive humidity regulation
CIP 28 Tray Support (cod. SUPP.BAC.CIP28) – Metal frame for safe anchoring of the basin
CIP 40 Tray Support (cod. SUPP.BAC.CIP40) – Reinforced metal frame for 2-compartment channel
Red Float (cod. 97G) – Water level regulator for semi-automatic system
5 LT Water Tank (code 0083) – External tank for automatic ultrasonic humidification kit
Water Pipe Ø 10 mm (cod. TUB. MT) – Flexible hose for connecting an external tank (sold by the meter)
Plastic Bushing UB-1500 (cod. BOCC.148662) – Cable gland for ultrasonic humidifier tube input
IEC Female Socket (IEC PANEL code) – Panel connector for automatic humidifier cable connection
IEC cable with Schuko (cod. CAVO IEC+SCKH) – Power cable with male IEC plug for humidifier

🛠️ Plastic Structure and Components

Transparent Door CIP 28 (code PVC CIP DOOR) – Front door in crystal PVC
Transparent Door CIP 40 (PVC DOOR code CIP40) – Larger front door for CIP 40 model
CIP 28 Angle Guides (cod. GUIDE ANG.CIP28) – Pair of right+left guides for sliding doors
CIP 40 Angle Guides (cod. GUIDE ANG.CIP40) – Pair of reinforced guides for larger door model
Support Feet (code V284) – Anti-vibration rubber pads for incubator base
Control Panel Cover (cod. FIEM-COP.SC14) – ABS cover for electronic panel protection
MiniLED front panel (LCD FRONT E. code) – Plastic cover with graphic membrane for keyboard
Hole Cover Bushing (code 338574) – Plastic cap for closing unused holes

⚡ Electronics and Wiring

Schuko Power Cable (code SCHUCKO) – Single-phase cord 230 V ~ 50-60 Hz with European plug
Single Pole Switch RL 34 (code RL 34) – On/off button for LCD thermostat
2A fuse (code CF521220) – Electrical circuit protection against overloads
Fuse holder (cod. ITWHK52001) – Safety fuse housing
Skintop cable gland (cod. REISTPG16) – PG16 cable gland for electrical cable entry

⭐ Top CIP Spare Parts CIP 28/40 – Quick Table

Component	Code	Compatibility	Technical Notes
MiniLED Advanced Thermostat	MINILED ADVANCED	CIP 28 / CIP 40	Includes T/H probe, accuracy 0.1°C
Egg Turning Gear Motor	117/F	CIP 28 / CIP 40 / Inca / Smart / Cosmo	Universal for multiple FIEM models
Heating Resistance	R75E	CIP 28 / CIP 40	Silicone cable 2.06 m, 95-130 W
Fan Motor	37/A	CIP 28 / CIP 40 / Inca	Silent forced ventilation
SHT31 T/H probe	SHT31	CIP 28 / CIP 40 (with MiniLED)	Combined temperature/humidity sensor
Alcohol Thermometer °F	05/A	CIP 28 / CIP 40	Analog temperature control
CIP 40 Egg Turning Grid	173B	Only CIP 40	Structure without inserts (sold separately)
CIP 28 Humidity Tray	350 TOP	Only CIP 28	Natural evaporation
CIP 40 Humidity Channel	CANALETTA	Only CIP 40	Adjustable double compartment
Transparent Door CIP 28	PVC CIP DOOR	Only CIP 28	PVC crystal door
Safety Fuse	CF521220	CIP 28 / CIP 40	2A electrical circuit protection
Plastic Egg Turning Joint	F117M	CIP 28 / CIP 40 / Smart / Cosmo	Subject to wear, periodic checks

✅ Why Choose Original FIEM Spare Parts for CIP CIP 28 and CIP CIP 40?

🎯 Designed specifically for your incubator

🎚️ Precision in control components
The MiniLED Advanced thermostat maintains temperature accuracy to within 0.1°C, essential during critical incubation days 18-21 when even a 0.3°C deviation can delay hatching. The original SHT31 probe ensures stable readings even with ambient humidity fluctuations greater than 30%.

💪 Superior mechanical resistance
The 117/F gearmotor can withstand over 15,000 voltage cycles (equivalent to approximately 50 complete incubations) without losing torque. The F117M plastic coupling is made of reinforced technopolymer that withstands temperatures up to 45°C without deforming, a common occurrence in engine compartments during the summer.

🛡️ Compliance with applicable CE regulations
Electrical components (resistors, cables, thermostats) comply with European Directives 2014/35/EU (Low Voltage) and 2014/30/EU (EMC), where applicable for the product category. This ensures protection against overvoltages and electromagnetic interference that could damage sensitive electronics.

👨‍🔧 Dedicated technical assistance
Each replacement is supported by telephone or WhatsApp consultancy.

📅 Extended spare parts availability
FIEM guarantees spare parts availability for several years after production of the CIP 28 and 40 models. This protects you from planned obsolescence: even if you purchased your incubator 7-8 years ago, you can still find compatible gearmotors, heating elements, and thermostats without having to replace the entire machine.

📦 Shipping and Support for CIP CIP 28 / CIP CIP 40 Spare Parts

🚚 Direct shipping from FIEM Guanzate
All spare parts are shipped exclusively from the FIEM factory in Guanzate, in the province of Como, via tracked courier. Typical delivery times are 2-4 business days in Italy. For urgent orders (e.g., a mid-cycle incubator block), please indicate your priority when ordering and we will consider express shipping.

📄 Warranty and Documentation
Original FIEM spare parts are covered by a warranty against manufacturing defects: 12 months for VAT-registered customers, 24 months for private individuals from the invoice date. Always keep the FIEM transport document as an official warranty document. In the event of a defective component, replacement is carried out after verifying the problem (often solvable with a WhatsApp photo).

💬 Minimum Order: Transparency on Logistics Costs

For spare parts orders a minimum amount of €20 (VAT excluded, shipping excluded). This threshold serves to cover the operating costs that make the service possible:

Search and collection time – Each component (e.g. a single F117M joint costing €1.58) must be located in the FIEM warehouse among thousands of references, visually checked for integrity and carefully extracted
Professional shockproof packaging – Electronic components such as the MiniLED Advanced require anti-static bags and bubble wrap, while egg turning grids should be protected with shaped cardboard to avoid bending.
Administrative management – Invoice issuance, tax registration, inventory control, management system updates
Tracked courier organization – Pickup booking, label generation with tracking, customer notification, management of any delivery problems

💡 Practical advice: If you need a replacement below the threshold (e.g., a €0.42 CF521220 fuse), take advantage of this opportunity to also order "preventive maintenance" components such as the F117M plastic seal (which wears out over time) or a spare 05/A thermometer (vulnerable to impacts). You'll easily reach €20 and have spares ready for future needs.

🧰 Best Practices for Maintenance of CIP Spare Parts CIP 28 / CIP CIP 40

🔍 Pre-season inspection of the gear motor
Before each incubation cycle, manually insert the egg turning grid and check that the F117M coupling pin is securely attached to the bracket. Even 1-2 mm of play can cause disengagement during movement. If you notice resistance or unusual noises, apply a drop of lubricating oil to the internal gears (opposite the drive shaft).

🌡️ Checking the alcohol thermometer

At each incubation cycle, check that the internal column is not interrupted, thus distorting the correct temperature reading.

💧 Monthly cleaning of humidity trays
Limescale deposits create niches for germs. Every 3-4 incubations, immerse the tray (350 TOP or CANALETTA) in a 50/50 white vinegar solution for 30 minutes, then rinse thoroughly. Dry completely before returning to the incubator to prevent bacterial growth.

⚡ Biannual electrical connection inspection
Disconnect and reconnect all MiniLED thermostat connectors (T/H probe, power supply, resistor) to remove any oxidation. If a contact appears blackened, gently clean it with isopropyl alcohol and a cotton swab. Poor contact on the SHT31 probe can cause erratic humidity readings.

🔄 Periodic rotation of the transparent door
The PVC door (CIP PVC DOOR / CIP40 PVC DOOR) may warp slightly with heat and humidity. Every 6 months, disassemble it, clean it with a neutral detergent, and let it "rest" in a horizontal position for 24 hours at room temperature. This restores its flatness and ensures a hermetic seal.

💼 Practical case from the field: A customer from Treviso complained of irregular hatching (60-70% instead of 85%) despite a stable temperature of 37.7°C. We had him send photos of the SHT31 T/H probe via WhatsApp: the sensor was covered in a light layer of dust (dry down). After cleaning with compressed air, the hatching rate returned to 82-87%. Cost of intervention: €0, resolution time: 15 minutes. Bottom line: before replacing expensive components, always check for cleanliness and connections.

❓ Frequently Asked Questions about CIP CIP 28 / CIP CIP 40 Spare Parts

🔧 The MiniLED display shows "ERR" and the temperature does not rise, what do I check before ordering spare parts?
Error "ERR" indicates a problem with the temperature probe or resistor. Mandatory power cycle: Unplug the cable, wait 60 seconds, and plug it back in. If the problem persists, check that the T. LCD probe connector is properly inserted (audible click). Finally, measure the resistance of the R75E cable with a tester: it should read approximately 245 Ohm/m × 2.06 m = 505 Ohm total. Infinite value = broken cable, value

🌀 The fan is making an increasing metallic noise, do I need to replace the 37/A motor?
Not always. Often the noise is caused by dust accumulation on the bearings or unbalanced blades. Procedure: Turn off the incubator, remove the mesh guard (NET CIPCIP40), and blow compressed air onto the bearings on both sides. If the noise persists, apply 1-2 drops of lubricating oil (such as Singer sewing machine oil) to the metal bearings. Turn the power back on and test for 10 minutes. If the noise disappears, you've saved €38 on a new motor. Replace only if the fan struggles to start or stalls.

📦 Can I order just the 173B egg turning grid without the INSERT.CIP40 inserts?
Yes, the 173B frame (code grid) and the metal inserts (code INSERT.CIP40) are sold separately. This allows you to order additional inserts if you raise different species (e.g. 1 set for chicken eggs, 1 set for quail eggs) without duplicating the complete grid.

📱 Send us a photo of the item and we'll help you make the right purchase.
Write to us on WhatsApp +39 3518819586. Required: complete incubator photo + model plate + damaged component + brief description of the problem. We will respond immediately with the exact spare part code and FIEM Guanzate warehouse availability.

Sources: FIEM New Generation 2025 Catalogue, page 5; CIP User Manual CIP 28-40 (2022), maintenance and troubleshooting sections; CipCip40 Rev. 1 exploded view, component nomenclature; FIEM CIP 28-40 (2025) spare parts list, verified codes and compatibility; Padovan Avicoltura operating experience.

There are 36 products.

Sort by:

FIEM

Fiem Smart and Cip Cip 28/40 Temperature...

€26.90

Availability: 1000 In Stock

🌡️ Who would have thought that a simple glass tube with some red liquid could make the difference between a perfect hatch and a disaster?

Yet, after 45 years of experience in the poultry industry, I can assure you that the 05/A thermometer is precisely the detail that separates successful breeders from those groping in the dark. 🎯

This column thermometer, with its perfectly calibrated Fahrenheit scale, is the watchful eye that constantly monitors your precious embryos, ensuring they receive exactly the 37.7°C (100°F) that is vital for their development.

⚠️ The mandatory transition from mercury to colored alcohol, imposed by European regulations, has made this instrument slightly more delicate - the red column could fragment if stored incorrectly or subjected to temperature changes.

💡 But don't worry: as the FIEM manual suggests, placing it in the freezer for a few minutes and then immediately under hot water often solves the problem. And what if it just won't come back together? For just €22.05 (excluding VAT), you can get an original FIEM spare part guaranteed for 24 months for private individuals, or 12 months for VAT-registered customers.

🔧 The beauty of this thermometer is that it can be installed in just a few seconds in its dedicated clip (code 17A), gently rotating it from the bottom up—never frontally as specified in the manual. Position the bulb midway between the eggs and you'll always have the temperature situation of your incubator under control, whether it's a Smart or a CipCip 28/40 .

📊 Don't underestimate the importance of this little guardian: even a small change can compromise your hatching percentages.

📱 Rapid Technical Assistance
Send photos of the incubator, tag, and current thermometer on WhatsApp
We will reply to you shortly during business hours

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available.

FIEM

ABS Thermometer Holder for Fiem Cip Cip 28 and...

€0.65

Availability: 1000 In Stock

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

FIEM

Fiem Smart Adhesive Keyboard Membrane /...

€3.40

Availability: 1000 In Stock

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Egg Turning Gear Motor for Fiem Smart, Cosmo,...

€53.68

Availability: 198 In Stock

The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

FIEM

Power Cable for Automatic Humidification of...

€14.23

Availability: 1000 In Stock

🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Replacement Fan 120x120mm (37/A) for CipCip...

€47.14

Availability: 1000 In Stock

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Anti-Vibration Metal Supports for CIP 28 and 40...

€1.28

Availability: 1000 In Stock

CIP 28 and 40 Metal Fan Motor Brackets – Small but essential. These brackets keep the fan perfectly aligned, ensuring uniform air circulation in the incubation chamber. Without them, abnormal vibrations and noises can compromise thermal stability and therefore hatching success.

A customer from Vicenza called me worried: he could hear a metallic rattling noise from his CIP CIP 40 incubator on the 12th day of incubating pheasant eggs. After checking, we discovered that one of the fan's metal supports had come loose. Once fixed, the machine went silent again, and the hatching was successful.

When are they needed? If you hear abnormal vibrations, metallic noises, or rattling coming from the fan compartment, or if you notice that the fan isn't perfectly centered, the bearings probably need replacing. Even during preventative maintenance , when you replace the fan motor, it's good practice to check the condition of the bearings.

⚠️ Before ordering: Unplug the fan, open the control panel, and visually inspect the brackets for damage, rust, or missing parts. Sometimes, a thorough cleaning of the fan is enough to eliminate the noise.

📸 Not sure? Send us a photo on WhatsApp (incubator open, fan visible): we'll help you determine if the supports are the problem or if there's something else.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private customers / 12 months for VAT number. Since 1975, FIEM has been synonymous with reliability in the poultry sector.

FIEM

Fan Protection Net for Fiem Cip Cip 40 Incubator

€12.81

Availability: 1000 In Stock

CIP Fan Protective Net CIP 28 / CIP CIP 40 – The safety barrier that protects the ventilation system. This metal mesh prevents debris, feathers, and shell fragments from entering the fan, maintaining air circulation and preventing noise or blockages during incubation. It also prevents the operator from inadvertently coming into contact with the fan.

A breeder in Treviso contacted me about a strange noise from his CIP 28 incubator: "It sounds like something is scratching the fan blades." Upon opening the incubator, we found the protective mesh was deformed and touching the fan with each rotation. After replacing the mesh, the problem went away, and incubation continued without a hitch.

When is it needed? If you notice rubbing noises, the mesh probably needs replacing. Even after aggressive cleaning with corrosive products , or if the mesh appears visibly rusted, deformed, or has loosened meshes, it's time to replace it.

⚠️ ATTENTION WHEN ORDERING: There are two versions – always specify whether you need it for CIP CIP 28 or CIP CIP 40 when ordering. The dimensions are different and are not interchangeable.

📸 Not sure which model you have? Send us a photo of the incubator's identification plate (located on the back) on WhatsApp – we'll immediately confirm which network you need.

Installation: Quick and easy. Always unplug before opening. The net is attached with just a few screws; no electrician required.

💰 Price CIP CIP 28 and 40: €10.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Consider adding other maintenance parts (fuse, thermometer, humidity trays) to complete your order and reach the minimum threshold.

📦 Logistics: Ships within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM, leader in artificial incubation since 1975.

FIEM

CIP Resistance Fixing Collars CIP 28 / 40

€1.93

Availability: 1000 In Stock

CIP 28 / CIP 40 Heating Element Fixing Collars – Small but essential. These supports hold the heating cable in the correct position, preventing movement that could create overheating points or dangerous contacts.

When are they needed? When replacing the R75E resistor, it's essential to check the condition of the collars. If they're worn, broken, or missing, they should be replaced along with the resistor.

💰 Price: €1.58 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Add R75E resistor (€12.18) + fuse (€0.42) + thermometer (€22.05) for a complete maintenance kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Fiem CIP Semi-Automatic Red Moisture Float CIP...

€6.15

Availability: 994 In Stock

Red Water Float for Fiem Semi-Automatic Humidity Systems CIP 40-MG50-MG70-MG100-MG140-MG200-MG320 The automatic water level controller. This float regulates the flow of water into the humidity trays, maintaining the optimal level without manual intervention during incubation.

When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Humidity Channel for Fiem Cip Cip 40 Incubator...

€7.93

Availability: 1800 In Stock

Humidity Channel for CIP 40 – The tray designed to ensure proper humidity. With two separate compartments, it allows for precise humidity adjustment during incubation and hatching by simply filling one or both compartments. A float, sold separately, can be inserted into one compartment and connected to the tank of the Fiem semi-automatic humidification system.

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Fiem CIP 40 Metal Support for Humidity Channel

€6.71

Availability: 1000 In Stock

CIP 40 Humidity Channel Metal Support – The bracket that holds the water channel in place. This metal support ensures stability and proper positioning of the humidity tray on the bottom of the incubator.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

CIP 28 Metal Support for Humidity Trays

€5.49

Availability: 1000 In Stock

CIP 28 Metal Humidity Tray Support – The bracket that holds the 2 water trays in place. This metal support ensures stability and proper positioning of the humidity trays inside the incubator.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

5 lt water tank for Fiem semi-automatic...

€10.76

Availability: 998 In Stock

5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Humidity tray for Fiem CIP28 incubator,...

€1.59

Availability: 1000 In Stock

Humidity Tray 350 TOP for CIP CIP 28 – The tray designed to ensure the correct humidification in the CIP CIP 28. Compact and functional, it fits easily into the bottom of the incubator to maintain the optimal humidity level during incubation and hatching.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Semi-automatic Humidity System Connection Tube...

€2.31

Availability: 998 In Stock

Semi-Automatic Humidity System Connection Tube – The vital link between the external tank and the incubator. This food-grade PVC tube transports water from the tank to the trays, ensuring constant humidity without manual intervention.

A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

Universal Compatibility:

Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Single-Pole Switch for Fiem Control Unit -...

€0.65

Availability: 1000 In Stock

RL 34 Single-Pole Switch for FIEM Control Units – The on/off switch for control units. This switch allows you to manually turn the control unit on and off, ensuring direct control over the system's power supply.

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

UB-1500 Plastic Bushing for Fiem Ultrasonic...

€1.02

Availability: 1000 In Stock

FIEM UB-1500 Plastic Bushing for Humidity System Pipe Inlet – A safe passage for the water pipe. This plastic bushing fits into the incubator's hole, allowing the humidity system pipe to pass from the outside to the inside, protecting the pipe from wear and ensuring a proper seal.

When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM

Plastic Cams for Fiem Smart, Easy, Cip, Inca,...

€1.93

Availability: 1000 In Stock

SMART/EASY/CIP/INCA/COSMO Gear Motor Cams / Plastic Joint for Turning Motor – The connecting component between the electric motor and the egg turning grid. This plastic joint transmits the motor's rotary motion to the grid, allowing the eggs to turn automatically.

A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.

When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.

Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam

💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.

Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.

⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).

Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Temperature Probe for Old Fiem LCD Control Unit

€16.72

Availability: 1000 In Stock

LCD Thermostat Temperature Sensor (old) – The sensor that detects the incubator's internal temperature and allows the LCD thermostat to regulate the heating. This critical component constantly transmits temperature data to the thermostat to maintain the incubator at 37.5-37.7°C.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

FIEM

Fiem Mini LED Advanced control unit with...

€214.72

Availability: 1000 In Stock

The MINILED ADVANCED is the standard digital control unit installed on many FIEM incubators. It is designed to ensure precise automatic temperature and humidity control, thanks to an intuitive LED system and self-calibrating sensors. It represents an evolution of the previous Mini LED model, improving efficiency, precision, and ease of use.

The FIEM Advanced Mini LED Control Unit is the perfect digital heart for those seeking precision, simplicity, and reliability in incubation. The self-calibrating digital sensor ensures accurate readings within ±0.1°C and ±1.5% RH, ensuring ideal conditions for hatching.

It is the ideal choice for hobbyists, small breeders, beekeepers and enthusiasts who want to improve their success rates without technical complications.

Why choose it?

Ease of use even for beginners
Reliable digital control
Compatibility with mid-range FIEM incubators

What customers say: Users praise its intuitive operation, precise climate control, and solid construction. One customer writes: "I use it on an MG50: precise, quiet, and reliable." Reviews on forums and e-commerce sites confirm its high popularity among breeders.

FIEM COMO WAREHOUSE – Only original FIEM spare parts to ensure the long-term efficiency of your incubator.

Compatibility: CIP CIP 28/40, MG50, MG70, MG100, API Series

Includes: Complete control unit + T/H (temperature/humidity) probe 230V

👉 Perfect for those looking for a simple yet precise digital control unit, for effective and worry-free incubation.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

FIEM

Fiem Mini LED Control Unit with Temperature and...

€183.57

Availability: 998 In Stock

MiniLED Thermostat (OLD) / MiniLED Control Unit (OLD) Complete with lid and front panel – The digital control unit for FIEM incubators (previous version). Advanced system for precise temperature and humidity management with a bright 7-segment display and dual sensors.

The FIEM Mini LED control unit is an advanced incubator control system, designed to ensure precise temperature and humidity management. Equipped with a large seven-segment display, it offers clear and immediate readings. Thanks to the connection to the FIEM Limpia automatic humidifier, it allows direct humidity control.

Main features:

✔ Bright display with decimal units for accurate reading
✔ Humidity display and adjustment with humidifier connection
✔ °C/°F conversion to suit different needs
✔ PID/ON-OFF temperature control mode
✔ Digital sensor calibration for optimal accuracy
✔ Dual temperature and humidity sensor for greater reliability

⚠️ OLD VERSION: This is the previous version of the MiniLED control unit. For newer incubators, the MiniLED Advanced (NEW) is available with a green LED display and improved features.

💰 Price: €110.30 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO – Padovan Avicoltura: only original FIEM components for reliable and long-lasting performance of your incubator.

Compatibility: CIP CIP, MG50, MG70, MG100, API Series (check specific model)

Includes: Complete control unit with double temperature and humidity sensor

By purchasing this product, you choose original FIEM spare parts, guaranteeing high performance for your incubator.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

FIEM

Wet Bulb Hygrometer / Incubation Hygrometer

€24.50

Availability: 1000 In Stock

Portable Wet Bulb Hygrometer / Incubation Hygrometer – Precision analog instrument for measuring relative humidity in incubators. Based on the psychrometric method, considered one of the most accurate.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

-€70.00

FIEM

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00

Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
🏠 Manage multiple incubators – One app for your entire fleet of machines
🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥

FIEM

Front Panel for Miniled, Miniled Advanced, Evo...

€20.25

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

📌 Scroll below for technical guidance, compatibility chart, and assembly.

ABS Cover for Fiem Control Panel

€21.35

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

✓ 🔍 Precise search for spare parts
✓ ✅ Check component integrity before departure
✓ 📦 Reinforced protective packaging
✓ 📝 Accounting management and tracking

📌 Scroll below for a complete guide, compatibility, and installation.

FIEM

Support Foot for Fiem Incubators

€0.73

Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🦶 The foot that keeps the machine stable and level.
When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.

Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.

Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.

⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.

Essential data:
💶 Price: €0.60 + VAT (single sale)
🔧 Compatibility: All FIEM models
🏷️ Code: V284
📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.

Any questions? WhatsApp me: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

✓ 🔍 Precise search for spare parts
✓ ✅ Check component integrity before departure
✓ 📦 Reinforced protective packaging
✓ 📝 Accounting management and tracking

📌 Scroll below for full compatibility and fitment.

FIEM

Transparent PVC Door Cip cip 28/40

€15.86

Availability: Out of stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🪟 The transparent window that lets you check without opening.
When it has cracks, clouding or warping, you lose visibility and risk heat and humidity losses.

Quick diagnosis: opaque PVC, cracks, door that doesn't close tightly, or warping. Every opening disrupts critical parameters.

Solution: FIEM transparent PVC door for CIP 28 and 40. Watertight and maximum visibility. Lifespan: 6–8 years.

📌 Real case: Treviso breeder with CIP 40, door warped and unable to maintain proper humidity. Replaced, humidity perfect, hatching improved.

⚠️ When to replace: at the first signs of clouding. Opening the egg frequently reduces hatching.

Essential data:
💶 Price:
• CIP CIP 28: €13.00 + VAT
• CIP CIP 40: €19.50 + VAT
🔧 Compatibility: CIP CIP 28 or 40
🏷️ Code: PVC DOOR CIP 28/40
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Any doubts? Photo of the tag on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT (CIP 28 model), reach the minimum amount by adding additional items. The CIP 40 model already exceeds the threshold.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for assembly and maintenance guide.

FIEM

Cip Cip 28/40 MG50 COSMO Egg Turning Grid Insert

€1.46

Availability: 237 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.

Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.

Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.

⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.

Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for compatibility and fitment.

FIEM

2 Amp Glass Fuse for Fiem Incubators

€0.51

Availability: 986 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
⚡ Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

FIEM

FIEM 5x20 panel fuse holder

€0.77

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The fuse holder that keeps the contacts always clean and safe.
When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.

Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.

Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.

⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.

Essential data:
💶 Price: €0.63 + VAT (each)
🔧 Compatibility: All FIEM models with standard fuse holder
🏷️ Code: ITWHK52001
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and replacements.

FIEM

Fiem Anti-Condensation Humidity Probe...

€3.54

Availability: 999 In Stock

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

✅ Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Fiem cable gland

€2.93

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and fitment.

FIEM

Side guides for PVC doors Cip cip 28-40

€8.54

Availability: Out of stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛤️ The tracks that guide the door into perfect movement.
When they are broken, worn or missing, the PVC door no longer slides properly, causing difficulty opening and loss of seal.

Quick diagnosis: door jamming, sluggish movement, broken or worn guides, door no longer closing flush. A small but essential component for smooth operation.

Solution: Pair of original FIEM corner guides (left and right) in durable metal for CIP 28 and 40. They guarantee smooth sliding and hermetic closure. Lifespan: 8–10 years.

📌 Real case: Verona farmer with CIP 28, right-hand drive broken. The door would jam, forcing him to force it open. Both replaced, now it opens smoothly and seals perfectly.

⚠️ When to replace them: at the first signs of wear or tear. Forcing the door also damages the PVC and other components.

Essential data:
💶 Price (pair LH+RH):
• CIP CIP 28: €7.00 + VAT EACH. A
• CIP CIP 40: €9.00 + VAT EACH. A
🔧 Compatibility: CIP CIP 28 or 40
🏷️ Code: GUIDE ANG.CIP28-40
📦 Contents: Pair (left guide + right guide)
📦 Availability: IN STOCK – 24h shipping (railways)

Any doubts? Photo of the tag on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for assembly and compatibility guide.

FIEM

Hole Cover Bushing in PLT BPA 1600 Neutral CIP...

€1.42

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.

Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.

Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.

⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.

Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

FIEM

Fiem ML-Advanced and EvoPlus Central...

€51.85

Availability: 499 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.

Available in the sensor-only version or complete with sensor + protection + cable

Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.

Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.

Slight decimal fluctuations are within the normal characteristics of this type of sensor.

⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
📋 Exploded view ref.: Varies depending on the model
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Mg 100/150 Buon rapporto qualità/prezzo

Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

By Temistocle M. the 06/26/2025 - Incubatrice Fiem..

Qualità

Qualità prodotti ottima

By Salvatore C. the 06/04/2025 -

Guida calibrazione e ordini

🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e..

Buona incubatrice familiare!

Qualità

Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

By the 01/24/2025 -

ncubatrice per Allevatori Seri

Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

By Paolo C. the 01/23/2025 - Incubatrice FIEM..

Giuda interessantissima

Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e..

Giuda indispensabile

🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte..

Incubatrice Fiem MG 140/200: Qualità e Affidabilità

Qualità

Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

By the 09/19/2024 -

Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza

Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

By Antonio F. the 09/15/2024 - Incubatrice Fiem..

Ottimo omaggio

Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

By the 09/13/2024 -

Pagamento: A RATE, Bonifico, PayPal, Carta di Credito, Ricarica PostePay, Pagamento alla Consegna, Satispay ecc.

tags

Fiem Cip Cip 28-40: Accessories and Spare Parts

Original FIEM Spare Parts for CIP CIP 28 and CIP CIP 40 Incubators

🔧 Spare Parts for CIP Component CIP 28 / CIP CIP 40

🌡️ Temperature and Humidity Control

🔄 Automatic Egg Turning System

🔥 Heating and Ventilation

💧 Humidification and Plumbing Accessories

🛠️ Plastic Structure and Components

⚡ Electronics and Wiring

⭐ Top CIP Spare Parts CIP 28/40 – Quick Table

✅ Why Choose Original FIEM Spare Parts for CIP CIP 28 and CIP CIP 40?

📦 Shipping and Support for CIP CIP 28 / CIP CIP 40 Spare Parts

💬 Minimum Order: Transparency on Logistics Costs

🧰 Best Practices for Maintenance of CIP Spare Parts CIP 28 / CIP CIP 40

❓ Frequently Asked Questions about CIP CIP 28 / CIP CIP 40 Spare Parts

💡+ Info? Read the full description below.

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control Only €119 instead of €189 – €70 savings

Why thousands of farmers will no longer be able to do without it

Compatibility

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

Find the Ideal Incubator for Your Farm: Request Your Free Guide Now!

Request the Buying Guide

Are you a new customer?

Request a purchasing consultation

PADOVAN POULTRY FARMING

INFORMATION

INFORMATION  

ASSISTANCE

NEWSLETTER SUBSCRIPTION

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

INFORMATION