The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original Fiem spare parts from Padovan Avicoltura : L-shaped prismatic thermometer - 100°F for Fiem and Victoria incubators
Original Fiem Spare Parts : 3P+T Power Connector Female + Male MG50
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts. 40 years of experience at your service.
RESIST. DOUBLE IN SILICONE 2.00 m/286W (MG200-244-316-WOOD)-170 OHM/MT
🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!
At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.
⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.
⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.
💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!
✅ Compatible with Smart and Cosmo , standard for power cable passage.
📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.
🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.
Q10 mesh shelf with stainless steel frame for drying pollen: efficient solution for maximum quality in incubation, original Fiem spare parts.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Only at PadovanAvicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.
Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.
When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.
💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).
Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 140W armored heating element (MG100H - MG 200H). Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🚪 The invisible pin that holds everything in place.
Hinges are the small hinges that allow the transparent door to open and close properly. They seem insignificant, but if they break or become loose, the door won't close properly, and you lose heat and humidity.
Quick diagnosis: door that doesn't close properly, excessive play, broken or bent hinge, door that "falls" to one side.
Solution: Original FIEM door hinge for COSMO, COSMO EVO, and COSMO ML incubators. Price each.
📌 Real case: A customer in Bari with COSMO ML had a door that wouldn't close properly. He thought the door needed replacing, but it was just a broken hinge. Replaced in 5 minutes for less than 2 euros, problem solved.
⚠️ When to replace it: If the door no longer closes properly or you notice excessive play, check the hinges immediately. Improper closure causes heat and humidity to escape, compromising hatching.
Essential data:
💶 Price: €1.47 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: HINGES COS.
📋 Exploded view ref.: n. 3
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🏠 The foundation on which the entire incubator rests.
The COSMO base is the lower ABS shell that contains the humidity trays, supports the support mesh, and holds up the entire structure. If it cracks or breaks, you lose its watertightness, moisture retention, and stability.
Quick diagnosis: visible cracks, water leaks from the trays, body deformed by heat, breaks at the corners or attachment points.
Solution: Original FIEM COSMO primer in high-strength ABS. Compatible with COSMO, COSMO EVO, and COSMO ML.
📌 Real case: A customer in Vicenza with a COSMO incubator had a cracked bottom after 8 years of use. Water leaked from the trays, and the humidity never rose above 40%. After replacing the bottom, the incubator returned to working perfectly with stable humidity.
⚠️ When to replace it: If you notice cracks, warping, or water leaks, the bottom should be replaced. A damaged shell compromises airtightness and humidity, ruining entire broods.
Essential data:
💶 Price: €50.72 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FONDO COSMO
📋 Exploded view ref.: n. 5
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Constant and professional humidity control with the FIEM Limpia 4-liter humidifier
Designed to optimize humidity management during incubation, the FIEM Limpia ultrasonic humidifier is the ideal choice for those seeking precision, silence, and automation. Thanks to its nebulization system, it ensures a uniform supply of cold steam within the incubator chamber, improving the embryonic development environment and hatching rates.
Perfect for integration with FIEM incubators equipped with a digital control unit for automatic humidity regulation. The 4-liter tank ensures autonomy and operational continuity.
Positive reviews online : Reliable, precise, compact, and quiet. Also appreciated for its easy connection to the compatible Evo Plus and Mini LED Advanced models.
Criticisms found on the web: Some users recommend using only distilled water
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray
When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.
💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.
Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm
Suitable for Fiem MG200 incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Potentiometer for Fiem breeder Original spare parts
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital Thermostat 1 + Probe (Fiem Spare Parts) . Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to keep your incubator always in working order, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Italiano
Deutsch
Español
Français
