Support Foot for Fiem Incubators

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for technical guidance, compatibility chart, and assembly.

The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.

✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models

By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.

ATTENTION: Please check carefully that the spare part matches the image.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Armored heating element 250 W + 350 W (MG720-1000-1150h) 2 pieces (Original Fiem Spare Parts) We rely only and exclusively on original spare parts from the manufacturers of each product, so that you do not have to resort to non-original spare parts that could compromise the correct functioning of your product and consequently cause irreparable damage and risks to your safety.

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

Original Fiem spare parts for sliding PVC doors in artificial breeders: quality and precision for optimal operation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Fiem 1.5m tank-float connection tube for semi-automatic humidity control

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Red LED bulb for Fiem breeder

Water dispenser for Fiem hygrometer

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

Emu egg tray for FIEM's Ostrich series. Available in a 9-seater version.