PVC SLIDING DOOR (FIEM ARTIFICIAL BREEDER)

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility and fitment.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 140W armored heating element (MG100H - MG 200H). Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital thermostat probe. Only at Padovan Avicoltura will you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and after-sales consulting service, and user assistance to help you get the most out of your incubator.

COMPLETE FAN SPEED VARIATOR

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest

Original Fiem Spare Parts from Padovan Avicoltura: Victoria/Fiem Professional Plastic Hatcher for MG432-576-720-1300-2500 Incubators

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Spare parts for Fiem breeders: removable metal drawer

Choose Original Fiem Spare Parts for the removable metal drawer of the breeder: they ensure optimal functionality and long life.

Please check that the required part matches the image provided. If you have any questions or are having trouble finding the part you're looking for, please send us a photo of the component you need via WhatsApp. Thank you.

Fiem AIR CONDITIONED AA -68/24 Exotic Spare Parts and Options for MG50

Original Spare Parts for Fiem Incubators: 38x35 cm mesh lid for metal hatching drawer of Fiem MG70/100 incubator, Fiem MG100/150 incubator, Fiem MG140/200 incubator.

Only at PadovanAvicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

The single egg turning bar for the Fiem MG70/100 incubator is a fundamental component for ensuring the correct movement of eggs during incubation. Designed to be compatible with the Fiem MG70 and MG100 models, it ensures smooth and uniform rotation , preventing the risk of the embryo adhering to the shell.

✔ Compatible with Fiem MG70 and MG100 incubators
✔ Ensures uniform rotation for optimal hatching
✔ Strong and durable materials
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

PG9 IP66 cable gland

Fiem Exotic Spare Parts and Options Minimum Temperature Alarm with Safety Heating

Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting