PrestaShop

Fiem: Accessories and spare parts

FIEM Original Spare Parts for Incubators - Complete Components Guide

Need a part for your FIEM but can't figure out which one to order? We know how confusing it can be to navigate part numbers and technical references. This page contains the entire catalog of original FIEM components: from measuring instruments to the most complex electronic devices. 💬 Not sure which part you need? Contact us via 📱 WhatsApp at +39 351 881 9586. Send us four photos: a general view of the incubator, a label with technical data, the defective part, and a description of the problem. Together, we'll identify the right replacement for your device.
⚠️ Pay attention to the compatibility between FIEM models
Each component is specifically designed for a specific range of appliances (CIP CIP, MG Rurale, MG MAXI PRO, SMART Digital, Cosmo, Inca). Parts CANNOT be installed on other models, except where explicitly stated in the item description. Always check the identification label of your incubator before ordering.

✅ Advantages of Original FIEM Components

🎯 Specially developed for each device
Each component is manufactured taking into account the technical specifications of the intended device. Regulators are calibrated to precisely maintain the set parameters, and sensors are tested for the accuracy required for the incubation process.

🎛️ Complies with CE regulations, where applicable
FIEM electrical parts comply with directives 2014/30/EU (electromagnetic compatibility) and 2014/35/EU (Low Voltage), being designed according to the harmonised standards EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 (ref. CIP Manual CIP page 9, MG Manual page 13).

💪 Compatibility confirmed
Original FIEM components are tested by the manufacturer before shipping. Compatibility with the specific device is verified.

🛡️ Components available for several years
FIEM ensures the availability of components even for discontinued appliances for several years, guaranteeing continuous assistance for your appliance.

👨‍🔧 FIEM technical assistance active since 1975 + Padovan Avicoltura since 1980
Each component comes with operating instructions. If needed, our technical staff provides installation support via WhatsApp or phone. FIEM has been manufacturing incubators since 1975, and Padovan Avicoltura has been operating in the poultry sector since 1980.

📅 Coverage for 12/24 months from the invoice date
Twelve months for VAT holders, twenty-four months for private customers. Retain the FIEM transport document as official proof of the warranty (ref. CIP Manual, page 9, MG Manual, page 12).

📦 Shipping and Assistance Methods for FIEM Components

🚚 Shipments from the FIEM Guanzate plant
The entire components catalog is shipped exclusively from the FIEM production facility located in Guanzate, Como province, via courier with tracking. Typical delivery times: 2 to 4 business days within Italy.

📝 Original Components Warranty Coverage
Twelve months for VAT holders, twenty-four months for private customers from the invoice date. Retain the FIEM shipping document as official proof of warranty coverage. Coverage includes repair or replacement of all defective parts. The warranty covers any manufacturing defects and is excluded if the products have not been used according to FIEM specifications (see CIP Manual, page 9, MG Manual, page 12).

💬 Minimum Order Amount €20: Clarity on Operating Costs

A minimum amount of €20 has been established to offset the following cost items:

  • Time required to identify and collect the specific component from the FIEM warehouse
  • Cost and time to prepare professional protective packaging for delicate components
  • Order management, tax document issuance and documentation
  • Courier collection and tracking organization

💡 Operational tip : Consider adding spare absorbent cords, spare fuses, or an additional LED light source to your order. You'll always have the essentials for next season.

🧰 Recommendations for Maintenance of FIEM Components

  • 🌡️ Thermometer and Hygrometer : Store upright at a room temperature between 10-30°C when not in use. Before use, check for proper operation by verifying that there are no interruptions in the colored liquid column (ref. CIP CIP Manual pages 4-5).
  • 💧 Hygrometer absorbent cords : to clean, immerse in a container with water and a small amount of vinegar, bringing to the boil (ref. CIP CIP Manual page 11, note 7)
  • 🔄 Egg rotation gear motor : regularly check that the rotating disc pin is correctly inserted into the support on the mobile grid (ref. CIP CIP Manual page 5, photo 3)
  • ⚡ LCD control unit : when a failure occurs in the humidity or temperature sensors, the display shows ERR. Check the connections before proceeding with the replacement (ref. MG Manual page 6)
  • 🛡️ Humidification system float : after each incubation cycle, introduce a mixture of water and 30% white vinegar into the tray for approximately 2-3 hours, remove the float and rinse, then reassemble, checking that it is working correctly (ref. MG Manual page 5)

👼 Practical experience from the field : Check the humidification system's float regularly. A malfunctioning float can cause sudden water leaks (ref. MG Manual p. 14, troubleshooting table).

❓ Frequently Asked Questions about FIEM Components

The control unit displays "ERR" on the temperature parameter. What should I do?
If a temperature or humidity sensor fails, or if one of them is not connected, the ERR message will appear in the corresponding display mode and the relevant command will be disabled. Check the connections. If the ERR message persists, contact the manufacturer (ref. MG Manual page 6, CIP Manual page 6).

The fan doesn't turn on. What checks should I do?
The ventilator's operation must be checked visually; malfunction may compromise the incubation results. If the ventilator fails to activate, contact the manufacturer (ref. CIP Manual, page 10, note 2; MG Manual, page 14).

The thermometer has breaks in the column. Is it repairable?
If the colored liquid column shows breaks, try exposing the thermometer to very low temperatures for a few minutes, then immerse it in hot water. If it doesn't recompose, replace the thermometer (ref. CIP Manual, page 10, MG Manual, page 14).

💬 Can't find the part you need? Contact us via 📱 WhatsApp at +39 351 881 9586. Send us four photos: general view of the incubator, technical data label, defective part, and explanation of the problem. We'll let you know the correct part and its availability.

Sources: [FP] CIP CIP 28 and CIP CIP 40 user manual (2022) pages 4-5, 8-10, 11 | [FP] MG 140/200/320 manual Italian extract (2021) pages 4-7, 9-14, wiring diagram page 59 | [FP] MG316 REP EVOPLUS manual ITA (2025) | [FP] MG50 BIRD evo plus manual SPANISH

No products available yet

Stay tuned! More products will be shown here as they are added.

Mg 100/150 Buon rapporto qualità/prezzo
Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

By Temistocle M. the 06/26/2025 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Qualità

Qualità

Qualità prodotti ottima

By Salvatore C. the 06/04/2025 - This review was helpful 0 - 0 You've already voted
Report an abuse
Guida calibrazione e ordini
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 0 You've already voted
Report an abuse
Buona incubatrice familiare!

Qualità

Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

By the 01/24/2025 - This review was helpful 0 - 1 You've already voted
Report an abuse
ncubatrice per Allevatori Seri
Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

By Paolo C. the 01/23/2025 - Incubatrice FIEM.. This review was helpful 0 - 0 You've already voted
Report an abuse
Giuda interessantissima
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 1 You've already voted
Report an abuse
Giuda indispensabile
🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte.. This review was helpful 0 - 1 You've already voted
Report an abuse
Incubatrice Fiem MG 140/200: Qualità e Affidabilità

Qualità

Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

By the 09/19/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse
Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza
Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

By Antonio F. the 09/15/2024 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Ottimo omaggio

Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

By the 09/13/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse

Questo sito utilizza cookie per garantire una navigazione ottimale.