Fiem Spare Parts for Humidifiers and Related Accessories

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (Inca - MG50 - MG70 - Maya - MG100 - MG140) diameter mm 20X4h Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (MG 200 - MG 244 - MG316 ) cm 37x5 h6. Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.

✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity Tray 240 x 600 mm (MG 500)

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray

The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
🔧 Original Fiem steel spare part 14x9 cm
✅ Compatible with MG and Astrale
🛠️ Useful in high humidity conditions

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Ultrasonic humidifier water filter

Original spare parts for Fiem incubators from Padovan Avicoltura : Kit with 3 20 mm membranes + key for ultrasonic membrane humidifier . Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Simple and effective humidity control with the FIEM Humidity Kit

This complete kit is the ideal solution for those looking to automate humidity management within their FIEM incubator. Consisting of a tank with a plexiglass lid and float, an ultrasonic nebulizer with a membrane, an external tank, and a connecting tube, it ensures uniform and constant distribution of water vapor, improving environmental conditions for optimal hatching.

Perfect for small breeders, hobbyists, and professionals, this accessory is compatible with numerous FIEM models (except the MG50 CIP CIP 28-40 EI PLASTIC MODELS) equipped with a control unit set up for automatic humidity control. Installation is quick and easy, with no complex technical intervention required.

Positive reviews on the web: Appreciated for its ease of use, reliability in maintaining humidity parameters, and compatibility with many FIEM incubators.

Criticisms found on the web: Some users recommend checking the membrane periodically to ensure maximum efficiency.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : NEW HUMIDIFICATION SYSTEM with immersion cartridge resistance: a delicate and constant humidification system with digital regulation through the evaporation of heated water – available for multiple models

RESISTANCE ONLY to be combined with the semi-automatic humidification system kit. See photo.

Padovan Poultry Farming 360° Service

90th Professional Consulting Pre-sale for a targeted purchase.

180° Specialist Post-Sales Consultancy for correct use.

360° Spare Parts Assistance to keep your purchase running efficiently.

A customer from Rovigo called me: "The Limpia humidifier is constantly turning on and off, the humidity fluctuates, and the pheasant eggs are drying out." The IEC socket on the panel had oxidized contacts and was making poor contact. Simply moving the cable would shut off the humidifier. I replaced the socket, and it's been working perfectly for 18 months.

When is it needed? If the humidifier doesn't turn on even when plugged in , it turns on and off intermittently, or you see sparks when you plug it in. If the socket has burnt plastic or oxidized contacts, it should be replaced immediately to avoid a fire risk.

What is an IEC socket? It's an international standard (type C14 female)—the same connector found on PCs, monitors, and professional appliances. It guarantees safe connections up to 250V and 10A.

⚠️ Before ordering: Unplug everything, visually inspect the socket (are the contacts shiny or oxidized/black?), test the IEC cable on another device to rule out the cable as the problem.

📸 Not sure? Send us a photo of the IEC socket (focus on the inside) on WhatsApp and describe the symptoms.

Installation: 230V electrical work – Qualified technicians ONLY . If you're not an electrician, hire a professional.

💰 Price: €1.47 – FIEM WAREHOUSE COMO

Compatibility: FIEM Limpia humidifier and other FIEM devices with standard IEC connection.

Minimum order €20: Complete with 5L tank (€8.82) + Tube (€1.89/m) + Bushing (€0.84) + Float (€5.04).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

PG9 IP66 cable gland

LCD HUMIDITY SENSOR + CABLE AND CASE

New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).

Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.

Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.

ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H

Semi-automatic humidifier with internal tray with float, external 5-liter rectangular tank (the round one is no longer included) + tube + lid. The new system uses a tray with a constant-level water flow regulated by a float and equipped with an external 5-liter tank. (See attached photos).

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

Fiem kit to add a humidifier socket for the Mini LED and Mini LCD models without

The kit includes an IEC socket, power cables, and fastons. This work must be performed by a qualified electrician.

Fiem 1.5m tank-float connection tube for semi-automatic humidity control

Float Mod. C, horizontal inlet for Fiem incubator water tank

Constant and professional humidity control with the FIEM Limpia 4-liter humidifier

Designed to optimize humidity management during incubation, the FIEM Limpia ultrasonic humidifier is the ideal choice for those seeking precision, silence, and automation. Thanks to its nebulization system, it ensures a uniform supply of cold steam within the incubator chamber, improving the embryonic development environment and hatching rates.

Perfect for integration with FIEM incubators equipped with a digital control unit for automatic humidity regulation. The 4-liter tank ensures autonomy and operational continuity.

Positive reviews online : Reliable, precise, compact, and quiet. Also appreciated for its easy connection to the compatible Evo Plus and Mini LED Advanced models.

Criticisms found on the web: Some users recommend using only distilled water

When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

Universal Compatibility:

Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.

FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK