Humidity tray (MG 200 - MG 244 - MG316) Fiem spare parts

LCD HUMIDITY SENSOR + CABLE AND CASE

Simple and effective humidity control with the FIEM Humidity Kit

This complete kit is the ideal solution for those looking to automate humidity management within their FIEM incubator. Consisting of a tank with a plexiglass lid and float, an ultrasonic nebulizer with a membrane, an external tank, and a connecting tube, it ensures uniform and constant distribution of water vapor, improving environmental conditions for optimal hatching.

Perfect for small breeders, hobbyists, and professionals, this accessory is compatible with numerous FIEM models (except the MG50 CIP CIP 28-40 EI PLASTIC MODELS) equipped with a control unit set up for automatic humidity control. Installation is quick and easy, with no complex technical intervention required.

Positive reviews on the web: Appreciated for its ease of use, reliability in maintaining humidity parameters, and compatibility with many FIEM incubators.

Criticisms found on the web: Some users recommend checking the membrane periodically to ensure maximum efficiency.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

PG9 IP66 cable gland

Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.

The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
🔧 Original Fiem steel spare part 14x9 cm
✅ Compatible with MG and Astrale
🛠️ Useful in high humidity conditions

Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.

ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

Fiem kit to add a humidifier socket for the Mini LED and Mini LCD models without

The kit includes an IEC socket, power cables, and fastons. This work must be performed by a qualified electrician.

When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Float Mod. C, horizontal inlet for Fiem incubator water tank

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray

The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.

✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :