🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

Why thousands of farmers will no longer be able to do without it

• 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
• 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
• ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
• 🏠 Manage multiple incubators – One app for your entire fleet of machines
• 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

VOLTAGE ACTUATOR SIR S073-230V c162mm + support + crosspiece

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

Semi-automatic humidifier with internal tray with float, external 5-liter rectangular tank (the round one is no longer included) + tube + lid. The new system uses a tray with a constant-level water flow regulated by a float and equipped with an external 5-liter tank. (See attached photos).

The transparent door window with gray support is an essential spare part for Fiem incubators, designed to ensure optimal visibility inside the machine without compromising its thermal insulation . The gray support ensures stable attachment, while the transparent material allows you to easily monitor the incubation process.

✔ Compatible with Fiem incubators
✔ Transparent material for immediate incubation control
✔ Sturdy grey stand for stable fixing
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and optimal performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity Tray 240 x 600 mm (MG 500)

Original Fiem Spare Parts : Pheasant Incubation Basket, 38x35 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

INFO-WHATSAPP

Original spare parts for Fiem incubators from Padovan Avicoltura : CIP 28-40 heating element - MG 50 silicone steel 2.06 m . Only at Padovan Avicoltura will you find efficient pre- and post-sales service and spare parts guaranteed over time.

Optional Fiem Climatic Chambers electromechanical thermostat (maximum temperature alarm)

Original Fiem spare parts : Plastic cover for hatching drawer Fiem MG244-316-300-320 incubator S316 hatching

To be combined with plastic hatching drawer (code CASS.56020001)

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

The 30x40 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.

Minimum 20 pieces.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem spare parts from Padovan Avicoltura : Gearmotor (MG244-316) for complete Fiem egg turners