🎁FREE🎁Fiem Incubator Control and Calibration with Check-up Thermometer

Original Fiem Spare Parts: Incubation basket for goose eggs, size 43x58 cm

Suitable for Fiem MG320 incubator

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.

Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG140/200 Incubator

Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts

Original Fiem spare parts from Padovan Avicoltura : Gearmotor (MG244-316) for complete Fiem egg turners

Original Fiem spare parts from Padovan Avicoltura : ABS casing for MINI-LCD with front panel + FIEM switches + power cable

Original spare parts for Fiem incubators from Padovan Avicoltura : Easy silicone heating element, 1.20 m. Being able to count on a spare parts supply service is essential and makes the difference, adding value to the service provided by PadovanAvicoltura.

RESIST. (EASY) SILICONE 1.20 m 330 OHM / MT

Original Fiem spare parts from Padovan Avicoltura : L-shaped prismatic thermometer - 100°F for Fiem and Victoria incubators

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

A customer from Rovigo called me: "The Limpia humidifier is constantly turning on and off, the humidity fluctuates, and the pheasant eggs are drying out." The IEC socket on the panel had oxidized contacts and was making poor contact. Simply moving the cable would shut off the humidifier. I replaced the socket, and it's been working perfectly for 18 months.

When is it needed? If the humidifier doesn't turn on even when plugged in , it turns on and off intermittently, or you see sparks when you plug it in. If the socket has burnt plastic or oxidized contacts, it should be replaced immediately to avoid a fire risk.

What is an IEC socket? It's an international standard (type C14 female)—the same connector found on PCs, monitors, and professional appliances. It guarantees safe connections up to 250V and 10A.

⚠️ Before ordering: Unplug everything, visually inspect the socket (are the contacts shiny or oxidized/black?), test the IEC cable on another device to rule out the cable as the problem.

📸 Not sure? Send us a photo of the IEC socket (focus on the inside) on WhatsApp and describe the symptoms.

Installation: 230V electrical work – Qualified technicians ONLY . If you're not an electrician, hire a professional.

💰 Price: €1.47 – FIEM WAREHOUSE COMO

Compatibility: FIEM Limpia humidifier and other FIEM devices with standard IEC connection.

Minimum order €20: Complete with 5L tank (€8.82) + Tube (€1.89/m) + Bushing (€0.84) + Float (€5.04).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility and fitment.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

POWER SUPPLY 7.0 A-12/220V + cigarette lighter plug (JOLLY25 + PORTABLE NEST): the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for technical guidance, compatibility chart, and assembly.

Emu egg tray for FIEM's Ostrich series. Available in a 9-seater version.