L-SHAPED PRISMATIC THERMOMETERS - 100°F for Fiem and Victoria Incubators

A customer from Rovigo called me: "The Limpia humidifier is constantly turning on and off, the humidity fluctuates, and the pheasant eggs are drying out." The IEC socket on the panel had oxidized contacts and was making poor contact. Simply moving the cable would shut off the humidifier. I replaced the socket, and it's been working perfectly for 18 months.

When is it needed? If the humidifier doesn't turn on even when plugged in , it turns on and off intermittently, or you see sparks when you plug it in. If the socket has burnt plastic or oxidized contacts, it should be replaced immediately to avoid a fire risk.

What is an IEC socket? It's an international standard (type C14 female)—the same connector found on PCs, monitors, and professional appliances. It guarantees safe connections up to 250V and 10A.

⚠️ Before ordering: Unplug everything, visually inspect the socket (are the contacts shiny or oxidized/black?), test the IEC cable on another device to rule out the cable as the problem.

📸 Not sure? Send us a photo of the IEC socket (focus on the inside) on WhatsApp and describe the symptoms.

Installation: 230V electrical work – Qualified technicians ONLY . If you're not an electrician, hire a professional.

💰 Price: €1.47 – FIEM WAREHOUSE COMO

Compatibility: FIEM Limpia humidifier and other FIEM devices with standard IEC connection.

Minimum order €20: Complete with 5L tank (€8.82) + Tube (€1.89/m) + Bushing (€0.84) + Float (€5.04).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

Red LED bulb for Fiem breeder

Mesh door for Fiem artificial breeder

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (MG 200 - MG 244 - MG316 ) cm 37x5 h6. Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Spare Parts for Fiem Incubators : Mesh Lid for Plastic Hatchery Tray suitable for Fiem MG100/150 Incubators, Fiem MG140/200 Incubators. See usage example in second photo.

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

Original spare parts for Fiem incubators from Padovan Avicoltura : CIP 28-40 heating element - MG 50 silicone steel 2.06 m . Only at Padovan Avicoltura will you find efficient pre- and post-sales service and spare parts guaranteed over time.

Egg tray for the FIEM Struzzi series, available in 6 or 8-seater versions.

Original Fiem Spare Parts: Protective Net for Q10 Fan, Fiem MG50 Incubator  

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity probe EE060 0..1V polycarbonate. 1.5m wire

(SOST.MOD.GEFRAN)

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : NEW HUMIDIFICATION SYSTEM with immersion cartridge resistance: a delicate and constant humidification system with digital regulation through the evaporation of heated water – available for multiple models

RESISTANCE ONLY + connection cable to be combined with the semi-automatic humidification system kit. See photo.

Padovan Poultry Farming 360° Service

90th Professional Consulting Pre-sale for a targeted purchase.

180° Specialist Post-Sales Consultancy for correct use.

360° Spare Parts Assistance to keep your purchase running efficiently.

The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Very powerful professional egg candling lamp with maximum candling precision. Pair with a Fiem product.

IM 35 Power Lux : professional cold light egg candler with multiplication lens, 220-240V power supply.

After the eighth to tenth day of incubation, it's a good idea to candle the eggs to identify and eliminate any unfertilized eggs. For this purpose, we recommend the following egg candling models.

Original Spare Parts for Fiem Incubator : MG50 Useful for those who want to avoid dirtying the incubation drawer supplied with the machine.

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS