Inca Resistance (Original Fiem Spare Parts)

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🛡️ The fan guard isn't just a safety net: it's what prevents accidental contact with the moving blades and protects the fan itself from feathers and debris!

At €9.45 (excluding VAT) , the PROT.SMART is the protective metal mesh that covers the fan of your Smart incubator. It's not an optional accessory: it prevents objects, feathers, or worse, curious fingers from coming into contact with the rotating blades, and at the same time prevents debris from obstructing the fan and compromising ventilation.

🔧 This protective grille maintains optimal airflow while filtering out large particles that could damage the engine. The mesh is sized for maximum protection without impeding vital air circulation for embryos.

⚠️ When should you replace it? If the mesh is broken or bent, leaving dangerous gaps, if the mesh is warped and no longer fits properly, if it's rusted or corroded, or if it's missing after maintenance.

💡 Using the incubator without the protective grille is dangerous and can cause damage to the fan if objects enter the blades.

✅ Compatible with the Smart model as indicated in the FIEM price list.

📱 Is your grill damaged? Send us a photo on WhatsApp to check compatibility.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , safety in every detail. 24-month warranty for private individuals, 12 VAT numbers.

⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!

At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.

🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!

⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.

💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.

✅ Compatible with all Smart and CipCip models with standard European 230V power supply.

📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.

🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

✅ Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.