Original Fiem Spare Parts: 140 W Armored Heating Element (MG100H - MG 200H)
    Original Fiem Spare Parts: 140 W Armored Heating Element (MG100H - MG 200H)

140 W armored heating element (MG100H - MG 200H) (Fiem Original Spare Parts)

Reference: R75N - Brand: FIEM
€35.00
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 140W armored heating element (MG100H - MG 200H). Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

R75N

16 other products in the same category:

Fiem Anti-Condensation Humidity Probe Protection Case
FIEM

Fiem Anti-Condensation Humidity Probe...

€3.54
Availability: 999 In Stock

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

✅ Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

Fiem professional egg candler lamp
FIEM

Fiem professional egg candler lamp

€48.70
Availability: 98 In Stock

Very powerful professional egg candling lamp with maximum candling precision. Pair with a Fiem product.

IM 35 Power Lux : professional cold light egg candler with multiplication lens, 220-240V power supply.

After the eighth to tenth day of incubation, it's a good idea to candle the eggs to identify and eliminate any unfertilized eggs. For this purpose, we recommend the following egg candling models.

FIEM 60–95°F Easy-Read Thermohygrometer - Germany
FIEM

FIEM Easy-Read Precision Thermohygrometer...

€26.90
Availability: 196 In Stock

The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.

✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models

By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.

ATTENTION: Please check carefully that the spare part matches the image.

FIEM Cosmo Incubator Door Hinge
FIEM

FIEM Cosmo Incubator Door Hinge

€1.80
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🚪 The invisible pin that holds everything in place.
Hinges are the small hinges that allow the transparent door to open and close properly. They seem insignificant, but if they break or become loose, the door won't close properly, and you lose heat and humidity.

Quick diagnosis: door that doesn't close properly, excessive play, broken or bent hinge, door that "falls" to one side.

Solution: Original FIEM door hinge for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Bari with COSMO ML had a door that wouldn't close properly. He thought the door needed replacing, but it was just a broken hinge. Replaced in 5 minutes for less than 2 euros, problem solved.

⚠️ When to replace it: If the door no longer closes properly or you notice excessive play, check the hinges immediately. Improper closure causes heat and humidity to escape, compromising hatching.

Essential data:
💶 Price: €1.47 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: HINGES COS.
📋 Exploded view ref.: n. 3
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

Fiem Control Unit Single Pole Switch (General, Light, Egg Turner)
FIEM

Single-Pole Switch for Fiem Control Unit -...

€0.65
Availability: 999 In Stock
RL 34 Single-Pole Switch for FIEM Control Units – The on/off switch for control units. This switch allows you to manually turn the control unit on and off, ensuring direct control over the system's power supply.

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Mesh shelf specifically for drying pollen Q10 MESH SHELF WITH STAINLESS STEEL FRAME FOR A316
FIEM

Mesh shelf specifically for drying pollen Q10...

€40.30
Availability: 103 In Stock

Q10 mesh shelf with stainless steel frame for drying pollen: efficient solution for maximum quality in incubation, original Fiem spare parts.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

R75C Silicone Heating Element (123W) | Official Replacement for Smart Incubator
FIEM

123W Silicone Heating Element (R75C) for Smart...

€12.08
Availability: 1000 In Stock

🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!

At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.

⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.

⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.

💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!

✅ Compatible exclusively with Smart as indicated in the price list.

📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.

Hole Cover Bushing in PLT BPA 1600 Neutral CIP CIP28-40
FIEM

Hole Cover Bushing in PLT BPA 1600 Neutral CIP...

€1.42
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.

Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.

Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.

⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.

Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

FIEM COSMO TRANSFORMER 12/220V
FIEM

FIEM COSMO TRANSFORMER 12/220V

€17.50
Availability: 103 In Stock

FIEM COSMO 12/220V TRANSFORMER: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

5 lt water tank for Fiem semi-automatic humidity kit for CipCip40-MG50-MG70-MG100-MG140-MG200-MG320
FIEM

5 lt water tank for Fiem semi-automatic...

€10.76
Availability: 998 In Stock
5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Support Foot for Fiem Incubators - Original Fiem Spare Parts
FIEM

Support Foot for Fiem Incubators

€0.73
Availability: 196 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🦶 The foot that keeps the machine stable and level.
When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.

Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.

Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.

⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.

Essential data:
💶 Price: €0.60 + VAT (single sale)
🔧 Compatibility: All FIEM models
🏷️ Code: V284
📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.

Any questions? WhatsApp me: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • ✓ 🔍 Precise search for spare parts
  • ✓ ✅ Check component integrity before departure
  • ✓ 📦 Reinforced protective packaging
  • ✓ 📝 Accounting management and tracking

📌 Scroll below for full compatibility and fitment.

Fiem 40x60 cm Embossed Paper Mat for Hatching Tray
FIEM

Fiem 40x60cm Embossed Paper Mat for Hatching...

€0.51
Availability: 852 In Stock

Extended SEO Description (max 1000 characters):
The 40x60 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.

Minimum 20 pieces.