✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.
Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.
Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.
⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.
Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for compatibility and fitment.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
The metal insert is the guide that rolls each egg during automatic turning, mimicking the natural rotation of a hen. Its function is to keep the egg in a stable, upright position during the egg turning movements and ensure that the turning occurs without bumps or oscillations that could damage the embryo. The galvanized metal withstands constant humidity without rusting.
Replace the insert if you notice:
This spare part is available in two specific sizes for CIP CIP 28 and CIP CIP 40. MG50 COSMO. They are NOT interchangeable.
⏱ Estimated time: 30 seconds per insert | 🔧 Tools: None
Remove the rack from the incubator. Slide the damaged insert out of the rack's side rails. Insert the new insert, sliding it into the rails until it's fully seated. Make sure it's secure and that the egg sits properly. If replacing multiple inserts, make sure they're all at the same height for even rotation.
✅ 2-year FIEM warranty
Covers manufacturing defects. If there are any problems within 24 months, we'll repair or replace them free of charge.
🔄 Returns within 14 days
If for any reason you change your mind (returns cost money, so make an informed purchase), you can return the intact product within 14 days.
📞 Technical support available
Free support via WhatsApp, email, or phone.
🚀 Fast shipping from the FIEM Como warehouse
Ships within 24 hours - Tracked courier with delivery in 2-4 days throughout Italy.
🔒 100% secure payments
Your banking details are managed directly by the bank and encrypted: we never see or store them.
📱 ATTENTION
Please check the model (CIP 28 or CIP 40) before ordering. The inserts are NOT interchangeable. If in doubt, send us photos on WhatsApp.
📞 Need help?
🛒 Order now or ask for information
📞 WhatsApp: 351 881 9586
📧 Email: info@padovanavicoltura.it
📋 Legal Notice and Rights
© 2025 Padovan Avicoltura. All rights reserved.
PLAGIARISM PROHIBITED: Total or partial reproduction of this text/data on other websites is monitored and will be legally prosecuted (DMCA and Law 633/41) without notice.
42.5x41cm stainless steel pollen drying tray with stainless steel mesh for Fiem bee incubators. Top quality for your beekeeping.
Spare Parts and Exotic Options Fiem Timer Light Programming + Twilight Sensor
💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)
The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.
🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.
⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.
💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!
✅ Compatible with FIEM humidity probes .
📱 Problems with humidity readings? Send photos on WhatsApp
🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.
Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG140/200 Incubator
Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts
Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.
Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.
Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.
📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.
⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).
Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como
Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT excl.)
Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.
📌 Scroll below for a complete guide, compatibility, and installation.
Water dispenser for Fiem hygrometer
A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."
When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .
💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.
Minimum order €20: Perfect for ordering the complete semi-automatic kit.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
The protective net for the Fiem Cip Cip 28 incubator fan is a crucial accessory for ensuring safety and optimal performance. Designed to protect the fan from dust, feathers, and debris , it prevents possible obstructions that could compromise proper air circulation. Made of resistant and durable material , it ensures a constant flow of air, improving the uniform distribution of temperature and humidity within the incubator. Its simple installation keeps the fan efficient for longer , reducing wear and maintenance. Buy now at Padovan Avicoltura and ensure maximum performance for your incubator! (PART.N-2)
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions, please contact us via WhatsApp:
Simple and effective humidity control with the FIEM Humidity Kit
This complete kit is the ideal solution for those looking to automate humidity management within their FIEM incubator. Consisting of a tank with a plexiglass lid and float, an ultrasonic nebulizer with a membrane, an external tank, and a connecting tube, it ensures uniform and constant distribution of water vapor, improving environmental conditions for optimal hatching.
Perfect for small breeders, hobbyists, and professionals, this accessory is compatible with numerous FIEM models (except the MG50 CIP CIP 28-40 EI PLASTIC MODELS) equipped with a control unit set up for automatic humidity control. Installation is quick and easy, with no complex technical intervention required.
Positive reviews on the web: Appreciated for its ease of use, reliability in maintaining humidity parameters, and compatibility with many FIEM incubators.
Criticisms found on the web: Some users recommend checking the membrane periodically to ensure maximum efficiency.
The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .
✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean
For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.
⚠ If placed on the first floor at the top, add the lid (code 207/2) .
COMPACT FAN DIAM.250 ASP (MG300/316)
Original Fiem Spare Parts : Metal drawer for 38x50 cm hatching; suitable for the incubation and hatching department of the Fiem MG incubator, for the incubation department of the Fiem MG200/300 incubator.
See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.
Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity Tray 240 x 600 mm (MG 500)
Italiano
Deutsch
Español
Français
