✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.
Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.
Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.
⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.
Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for compatibility and fitment.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
The metal insert is the guide that rolls each egg during automatic turning, mimicking the natural rotation of a hen. Its function is to keep the egg in a stable, upright position during the egg turning movements and ensure that the turning occurs without bumps or oscillations that could damage the embryo. The galvanized metal withstands constant humidity without rusting.
Replace the insert if you notice:
This spare part is available in two specific sizes for CIP CIP 28 and CIP CIP 40. MG50 COSMO. They are NOT interchangeable.
⏱ Estimated time: 30 seconds per insert | 🔧 Tools: None
Remove the rack from the incubator. Slide the damaged insert out of the rack's side rails. Insert the new insert, sliding it into the rails until it's fully seated. Make sure it's secure and that the egg sits properly. If replacing multiple inserts, make sure they're all at the same height for even rotation.
✅ 2-year FIEM warranty
Covers manufacturing defects. If there are any problems within 24 months, we'll repair or replace them free of charge.
🔄 Returns within 14 days
If for any reason you change your mind (returns cost money, so make an informed purchase), you can return the intact product within 14 days.
📞 Technical support available
Free support via WhatsApp, email, or phone.
🚀 Fast shipping from the FIEM Como warehouse
Ships within 24 hours - Tracked courier with delivery in 2-4 days throughout Italy.
🔒 100% secure payments
Your banking details are managed directly by the bank and encrypted: we never see or store them.
📱 ATTENTION
Please check the model (CIP 28 or CIP 40) before ordering. The inserts are NOT interchangeable. If in doubt, send us photos on WhatsApp.
📞 Need help?
🛒 Order now or ask for information
📞 WhatsApp: 351 881 9586
📧 Email: info@padovanavicoltura.it
📋 Legal Notice and Rights
© 2025 Padovan Avicoltura. All rights reserved.
PLAGIARISM PROHIBITED: Total or partial reproduction of this text/data on other websites is monitored and will be legally prosecuted (DMCA and Law 633/41) without notice.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity Tray 240 x 600 mm (MG 500)
When are they needed? When replacing the R75E resistor, it's essential to check the condition of the collars. If they're worn, broken, or missing, they should be replaced along with the resistor.
💰 Price: €1.58 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Minimum order €20: Add R75E resistor (€12.18) + fuse (€0.42) + thermometer (€22.05) for a complete maintenance kit.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.
When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.
💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.
Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Kit to convert your Fiem mg 100/150 incubator from weekly to single-batch. You can choose the specific incubation tray for each breed during the purchase process by specifying in the notes. (Universal, geese, quail, pheasant).
Only at Padovan Avicoltura can you find all original Fiem spare parts.
Electric actuator (SIR) for egg turners, 24V DC. This product is not available in stock but can be ordered.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.
Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.
Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.
⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.
Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity probe EE060 0..1V polycarbonate. 1.5m wire
(SOST.MOD.GEFRAN)
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.
Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.
Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.
⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.
Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
🌀 The fan is not an optional extra: it is the incubator's lung that evenly distributes heat and oxygen, determining the life or death of the embryos!
At €32.03 (excluding VAT) , the 80mm diameter UF80B23STH fan is the heart of the ventilation system in Smart and Easy incubators. Without its constant action, you would have lethal hot and cold zones, a disaster for hatching!
💨 This specific FIEM fan ensures optimal air circulation, designed for the size of the incubation chamber. Warm air is evenly distributed, fresh oxygen reaches each egg, and CO2 is expelled. It's this constant ventilation that keeps embryos alive!
⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it turns slower than normal, if it stops intermittently, if the blades are dirty or damaged, or if it loses efficiency after years of continuous use.
💡 A malfunctioning ventilator causes: embryonic mortality due to asphyxiation, irregular development, dead zones in the incubator, drastically reduced hatching rates.
✅ Compatible with Smart and Easy as specified in the FIEM price list.
📱 Is your fan making a noise or not spinning properly? Send us a WhatsApp video for immediate diagnosis.
🚚 Secure shipping from Como in 1 day. No minimum order for this item. FIEM since 1975 , vital components for professional results. 24-month warranty for private individuals, 12 VAT numbers.
TIMER ECAM 220V egg turning actuator control (MG432-576-720-1300)
Original Fiem spare parts from Padovan Avicoltura : L-shaped prismatic thermometer - 100°F for Fiem and Victoria incubators
🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!
At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.
⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.
⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.
💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!
✅ Compatible exclusively with Smart as indicated in the price list.
📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.
Original Fiem spare parts from Padovan Avicoltura : Complete Digital Thermostat DIG1 Fiem spare parts. We rely exclusively on original spare parts from the manufacturers of each product, so you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and risks to your safety.
🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!
At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.
⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.
💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*
✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).
📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.
Italiano
Deutsch
Español
Français
