Cip Cip 28 Fan Protection Net

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!

At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.

⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.

⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.

💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!

✅ Compatible exclusively with Smart as indicated in the price list.

📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.