Single-Pole Switch for Fiem Control Unit - General, Light, Egg Turner - Original Fiem Spare Parts

Reference: RL 34 - Brand: FIEM
€0.65
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali
RL 34 Single-Pole Switch for FIEM Control Units – The on/off switch for control units. This switch allows you to manually turn the control unit on and off, ensuring direct control over the system's power supply.

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

RL 34 Single-Pole Switch for FIEM Control Units – Technical Data Sheet


📦 Compatibility

Compatible models: FIEM digital control units

Applications: MiniLED, MiniLED Advanced and other models with manual on/off control

Spare part code: RL 34

Manufacturer: FIEM Srl (Como, Italy)

⚠️ ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :

  • ✅ A photo of the required spare part
  • ✅ A photo of the incubator and the control unit
  • ✅ A photo of the label on the back of the incubator
  • ✅ A description of the fault, preferably with a video

This way we can help you more quickly. Thank you!

🔍 When you need this switch

The switch should be replaced when:

  • Switch stuck: Does not move or remains in an intermediate position
  • Intermittent contact: You have to press it several times before the control unit turns on
  • No contact anymore: The control unit does not turn on even though the switch is in the ON position
  • It produces sparks: When you press it, you see flashes or hear popping sounds.
  • Visibly damaged: Broken, burned, or showing signs of overheating
  • Loose Lever: It moves idly without commanding anything

⚠️ Before ordering: quick checks

Is the switch really the problem?

  1. Unplug the power cord from the electrical outlet (safety first)
  2. Check the fuse: Check that the fuse is intact (if it is blown, replace it first)
  3. Check the power supply: Verify that power is reaching the outlet (try with another device)
  4. Visual inspection of the switch: Are there signs of burning, melted plastic, or obvious damage?
  5. Mechanical Test: Does the switch move freely or is it stiff/stuck?

📸 Not sure? Send us a photo of the switch on WhatsApp and describe the symptoms: we'll help you diagnose it.

🔧 Technical characteristics (indicative)

Characteristic Typical value
Type Single-pole switch (on/off)
Rated voltage 250V AC
Rated current 2-6A (to be verified)
Assembly On the panel
Contact type SPST (Single Pole Single Throw)

Note: Exact technical specifications to be verified based on the specific control unit model.

🔧 Installation – FOR QUALIFIED TECHNICIANS ONLY

ATTENTION SAFETY

Electrical work – Requires specific skills

  • ALWAYS unplug the appliance before any intervention
  • Only work with the device completely turned off and unplugged
  • If you are not a qualified electrician → rely on a technician
  • The control unit operates at 230V: an error can be dangerous

Replacement procedure (for expert technicians only):

  1. Unplug the power cord from the electrical outlet
  2. Open the control unit by removing the panel screws
  3. PHOTOGRAPH the connections before disconnecting any cables
  4. Note the position of each wire (live, neutral, earth if applicable)
  5. Disconnect the wires from the switch (faston or terminal screws)
  6. Remove the old switch from its housing (usually clip or nut type)
  7. Mount the new RL 34 switch in the same position
  8. Reconnect the cables exactly as shown in the diagram.
  9. Check that there are no loose or touching wires.
  10. Reassemble the control unit panel
  11. Reconnect the plug and test the operation

💡 Advice from 45 years of experience: Before reassembling everything, test with the panel open (extra caution!) to make sure the switch is working properly. Only then should you close it completely.

❌ Common mistakes to avoid

  • Do not reverse the connections: Phase and neutral must go to the correct points
  • Don't forget the link photo: Without it you're in trouble.
  • Do not force the switch into place: It should fit easily.
  • Don't leave loose cables: They risk short circuits.
  • Don't improvise if you're not experienced: Call a technician

🛒 Commercial information

Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded)

FIEM COMO WAREHOUSE ORIGINAL SPARE PARTS

💬 Minimum Order: Transparency on Logistics Costs

For spare parts orders, a minimum amount of €20 (excluding VAT and shipping) is required.

This threshold serves to cover the operating costs that make the service possible:

  • Search and picking time – Each component must be located in the FIEM warehouse among thousands of references
  • Administrative management – Invoice issuance, tax registration, inventory control
  • Tracked courier organization – Pickup booking, tracking label, customer notification

💡 Tip: Add more electrical parts to complete your order.

💡 Related spare parts to order together

  • 2A Fuse (CF521220) (€0.42) – Always have in stock
  • R75E resistor (€12.18) – The heating cable
  • MiniLED Advanced Control Unit (€176.00) – If the control unit also shows malfunctions
  • Thermometer °F (05/A) (€22.05) – Analogue temperature control

📦 Logistics and times

  • Shipping: 1 business day
  • Delivery: 2-4 working days
  • Departure: FIEM Como Warehouse

✅ Guarantee

  • Warranty: 24 months for private customers, 12 months for VAT numbers
  • Support: WhatsApp 351 881 9586
  • FIEM since 1975: Original tested components

❓ Frequently Asked Questions (FAQ)

Q: Can I replace it myself without being an electrician?
A: Not recommended. It works with 230V and requires knowledge of electrical connections. It's best to rely on a qualified technician.

Q: Is the switch suitable for all FIEM control unit models?
A: Always check the specific part number for your control unit. Send a photo on WhatsApp to confirm compatibility.

Q: If the switch doesn't work, could it just be dirty?
A: Rarely. When electrical switches fail, they need to be replaced. Cleaning them doesn't fix internal contact problems.

Q: How long does a switch last?
A: With normal use, it can last for many years. Frequent on/off cycles will wear it out faster.

📞 Need help?

🛒 Order now or ask for information

📞 WhatsApp 351 881 9586
📧 Email: info@padovanavicoltura.it

We'll help you check compatibility and, if necessary, direct you to a local technician.


📋 Legal Notice and Rights

© 2025 Padovan Avicoltura. All rights reserved.
PLAGIARISM PROHIBITED: Total or partial reproduction of this text/data on other websites is monitored and will be legally prosecuted (DMCA and Law 633/41) without notice.

RL 34

16 other products in the same category:

Front Panel for Miniled, Miniled Advanced, Evo...

€20.25
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

📌 Scroll below for technical guidance, compatibility chart, and assembly.

Fiem Mini LED Advanced control unit with...

€214.72
Availability: 1000 In Stock
The MINILED ADVANCED is the standard digital control unit installed on many FIEM incubators. It is designed to ensure precise automatic temperature and humidity control, thanks to an intuitive LED system and self-calibrating sensors. It represents an evolution of the previous Mini LED model, improving efficiency, precision, and ease of use.

The FIEM Advanced Mini LED Control Unit is the perfect digital heart for those seeking precision, simplicity, and reliability in incubation. The self-calibrating digital sensor ensures accurate readings within ±0.1°C and ±1.5% RH, ensuring ideal conditions for hatching.

It is the ideal choice for hobbyists, small breeders, beekeepers and enthusiasts who want to improve their success rates without technical complications.

Why choose it?

  • Ease of use even for beginners
  • Reliable digital control
  • Compatibility with mid-range FIEM incubators

What customers say: Users praise its intuitive operation, precise climate control, and solid construction. One customer writes: "I use it on an MG50: precise, quiet, and reliable." Reviews on forums and e-commerce sites confirm its high popularity among breeders.

FIEM COMO WAREHOUSE – Only original FIEM spare parts to ensure the long-term efficiency of your incubator.

Compatibility: CIP CIP 28/40, MG50, MG70, MG100, API Series

Includes: Complete control unit + T/H (temperature/humidity) probe 230V

👉 Perfect for those looking for a simple yet precise digital control unit, for effective and worry-free incubation.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Cable Gland for Power Cable Fiem Smart and Cosmo

€0.77
Availability: 1000 In Stock

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Temperature Probe for ELPT2 Thermostat

€14.60
Availability: 103 In Stock

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Fiem Evo Plus control unit with advanced...

€390.40
Availability: 1000 In Stock
EVO PLUS Control Unit – The most complete and modern digital control unit in the FIEM range. Maximum control over incubation with a 2.4" TFT LCD color display, multilingual graphic menu, and advanced parameter management.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

  • Advanced temperature management (dual settings and time slots)
  • Complete automation with error reduction
  • Digital remote control via WiFi app
  • 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

Fiem Mini LED Control Unit with Temperature and...

€183.57
Availability: 998 In Stock
MiniLED Thermostat (OLD) / MiniLED Control Unit (OLD) Complete with lid and front panel – The digital control unit for FIEM incubators (previous version). Advanced system for precise temperature and humidity management with a bright 7-segment display and dual sensors.

The FIEM Mini LED control unit is an advanced incubator control system, designed to ensure precise temperature and humidity management. Equipped with a large seven-segment display, it offers clear and immediate readings. Thanks to the connection to the FIEM Limpia automatic humidifier, it allows direct humidity control.

Main features:

  • ✔ Bright display with decimal units for accurate reading
  • ✔ Humidity display and adjustment with humidifier connection
  • ✔ °C/°F conversion to suit different needs
  • ✔ PID/ON-OFF temperature control mode
  • ✔ Digital sensor calibration for optimal accuracy
  • ✔ Dual temperature and humidity sensor for greater reliability

⚠️ OLD VERSION: This is the previous version of the MiniLED control unit. For newer incubators, the MiniLED Advanced (NEW) is available with a green LED display and improved features.

💰 Price: €110.30 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO – Padovan Avicoltura: only original FIEM components for reliable and long-lasting performance of your incubator.

Compatibility: CIP CIP, MG50, MG70, MG100, API Series (check specific model)

Includes: Complete control unit with double temperature and humidity sensor

By purchasing this product, you choose original FIEM spare parts, guaranteeing high performance for your incubator.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

FIEM 5x20 panel fuse holder

€0.77
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The fuse holder that keeps the contacts always clean and safe.
When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.

Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.

Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.

⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.

Essential data:
💶 Price: €0.63 + VAT (each)
🔧 Compatibility: All FIEM models with standard fuse holder
🏷️ Code: ITWHK52001
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and replacements.

SOLD OUT Complete Digital Thermostat DIG1 Fiem...

€198.99
Add to cart
Availability: Out of stock

Original Fiem spare parts from Padovan Avicoltura : Complete Digital Thermostat DIG1 Fiem spare parts. We rely exclusively on original spare parts from the manufacturers of each product, so you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and risks to your safety.

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00
Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

  • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
  • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
  • Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
  • 🏠 Manage multiple incubators – One app for your entire fleet of machines
  • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥

Fiem Smart Display Cover Front (Exploded view...

€9.20
Availability: 1000 In Stock

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

2 Amp Glass Fuse for Fiem Incubators

€0.51
Availability: 986 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

Questo sito utilizza cookie per garantire una navigazione ottimale.