METAL SHUTTER FOR CO2 EXPULSION

🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!

At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.

🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.

⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.

💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!

✅ Specific for Smart , designed to perfectly close the gearmotor compartment.

📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🔥 The thermal fuse is the guardian that prevents dangerous overheating, protecting both the incubator and your precious eggs!

At €0.63 excluding VAT , the TV070 is the thermal safety fuse for FIEM incubators. This critical component automatically cuts off power in the event of a malfunction of an electrical component in the incubator.

⚠️ When should I replace it? If the incubator is off, the fuse has most likely blown and needs to be replaced.

💡 A blown thermal fuse always indicates an upstream problem: check the thermostat, heating element, and ventilation before replacing it.

✅ FIEM universal safety component , check specific model.

📱 Is your incubator no longer heating? Send photos on WhatsApp for immediate diagnosis.

🚚 Shipping from Como in 1 day. FIEM since 1975 , certified safety. 24-month warranty for private individuals, 12 VAT numbers.

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.