Complete Egg Turning Motor Kit (117/E) for Smart Incubators - Single Egg Turning Motor Kit

plexiglass door cip cip 40

Fiem 1.5m tank-float connection tube for semi-automatic humidity control

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 140W armored heating element (MG100H - MG 200H). Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

COMPLETE EGG TURNER KIT for SMART MAN.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Solid State Relay MP 240 D4 Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to always keep your incubator efficient, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

When are they needed? When replacing the R75E resistor, it's essential to check the condition of the collars. If they're worn, broken, or missing, they should be replaced along with the resistor.

💰 Price: €1.58 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Add R75E resistor (€12.18) + fuse (€0.42) + thermometer (€22.05) for a complete maintenance kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Complete tank with floating group for artificial breeder

Original Spare Parts for Fiem Incubators : Mesh Lid for Plastic Hatchery Tray suitable for Fiem MG100/150 Incubators, Fiem MG140/200 Incubators. See usage example in second photo.

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

Spare Parts and Exotic Options Fiem set of cylindrical inserts (10 pcs.) egg voltage + aluminum trolley MG50 COLIBRI

The new professional and versatile incubation and hatching tray for the MG50 BIRD/COLIBRÌ incubators is specifically designed for incubating exotic and ornamental animal eggs and, thanks to its removable and adjustable segments, can accommodate eggs of a wide variety of sizes. Also available in a professional version.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

The egg retaining springs for Fiem MG series incubators are original spare parts designed to ensure the correct positioning of eggs in the egg holders, especially when a row is incomplete. If all the eggs are missing from a row, there's a risk that the eggs will tilt or tip over during automatic rotation. The springs solve this problem by firmly locking the eggs into the empty compartments, keeping them upright and stable throughout the incubation period.

Compatible with all Fiem MG series incubators (MG 50, MG 70, MG 100, MG 140, MG 200 and above), these springs are made of strong and durable spring steel , designed to fit perfectly into the supplied tilting baskets. They are easy to install without tools, improve incubation safety, and ensure a higher hatching rate, even when the machine is partially used.

Rely on original Fiem spare parts , available from Padovan Avicoltura , to maintain high quality standards and protect your eggs at every stage.

Original Fiem Spare Parts from Padovan Poultry Farming : Professional 96-Egg Holder for Fiem Astral Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

Original Spare Parts for Fiem Incubators: 38x35 cm mesh lid for metal hatching drawer of Fiem MG70/100 incubator, Fiem MG100/150 incubator, Fiem MG140/200 incubator.

Only at PadovanAvicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).