50W resistance for automatic humidification Fiem

Original spare parts for Fiem incubators from Padovan Avicoltura : Kit with 3 20 mm membranes + key for ultrasonic membrane humidifier . Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

COMPLETE EGG TURNER GEAR MOTOR (MG50)

The 2.00 m / 143W 170 OHM/MT silicone heating cable is an essential component for the correct functioning of the Fiem MG50, MG70, MG100, MG140, MG320 incubators. This heating element ensures uniform heat distribution, ensuring a stable incubation environment for optimal embryo development.

✔ Compatible with Fiem MG50, MG70, MG100, MG140, MG320 incubators
✔ Length 2 meters, power 143W, resistance 170 OHM/MT
✔ Even heating for a constant temperature
✔ Silicone construction for high strength and durability

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

plexiglass door cip cip 40

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Semi-automatic humidifier with internal tray with float, external 5-liter rectangular tank (the round one is no longer included) + tube + lid. The new system uses a tray with a constant-level water flow regulated by a float and equipped with an external 5-liter tank. (See attached photos).

The 5W-34 220V fan motor is an essential component for ensuring uniform air circulation inside Fiem MG50, MG70, and Maya incubators. This spare part ensures even temperature and humidity distribution, improving incubation conditions for optimal hatching.

✔ Compatible with Fiem MG50, MG70 and Maya incubators
✔ 5W power and 220V power supply for optimal performance
✔ Ensures constant and effective ventilation
✔ Easy installation and long life

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Optional Fiem Climatic Chambers electromechanical thermostat (maximum temperature alarm)

42.5x41cm stainless steel pollen drying tray with stainless steel mesh for Fiem bee incubators. Top quality for your beekeeping.

Original Fiem spare parts from Padovan Avicoltura : Gearmotor (MG244-316) for complete Fiem egg turners

The transparent door window with gray support is an essential spare part for Fiem incubators, designed to ensure optimal visibility inside the machine without compromising its thermal insulation . The gray support ensures stable attachment, while the transparent material allows you to easily monitor the incubation process.

✔ Compatible with Fiem incubators
✔ Transparent material for immediate incubation control
✔ Sturdy grey stand for stable fixing
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and optimal performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.

ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H

500W nickel-chrome heating element (Fiem original spare parts)