Complete tank with floating group for artificial breeder

Original Fiem Spare Parts from Padovan Poultry Farming : Professional 96-Egg Holder for Fiem Astral Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Solid State Relay MP 240 D4 Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to always keep your incubator efficient, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts : Incubation and hatching drawer for Fiem MG50 incubator complete with egg turning kit.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.

LCD HUMIDITY SENSOR + CABLE AND CASE

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for assembly and maintenance guide.

Extended SEO Description (max 1000 characters)

The Q12 Fan Protection Net is an essential accessory for protecting the Fiem MG70 incubator fan, preventing accidental contact with the moving blades and improving system safety. Made of resistant materials, it allows optimal ventilation without obstructing airflow.

✔ Compatible with Fiem MG70 incubators
✔ Durable material for long life
✔ Prevents accidental contact with the fan
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing safety and reliability for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator

Spare Parts and Exotic Options Fiem set of cylindrical inserts (10 pcs.) egg voltage + aluminum trolley MG50 COLIBRI

The new professional and versatile incubation and hatching tray for the MG50 BIRD/COLIBRÌ incubators is specifically designed for incubating exotic and ornamental animal eggs and, thanks to its removable and adjustable segments, can accommodate eggs of a wide variety of sizes. Also available in a professional version.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Original Fiem spare parts from Padovan Avicoltura : ABS casing for MINI-LCD with front panel + FIEM switches + power cable

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

Original Fiem Spare Parts : Metal drawer for hatching, 38x35 cm; lowered, suitable for the incubation and hatching section of the Fiem MG70/100 incubator. Capacity: approximately 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs.

Above only the first drawer at the top add a lid (code 207/2)

See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.

The egg retaining springs for Fiem MG series incubators are original spare parts designed to ensure the correct positioning of eggs in the egg holders, especially when a row is incomplete. If all the eggs are missing from a row, there's a risk that the eggs will tilt or tip over during automatic rotation. The springs solve this problem by firmly locking the eggs into the empty compartments, keeping them upright and stable throughout the incubation period.

Compatible with all Fiem MG series incubators (MG 50, MG 70, MG 100, MG 140, MG 200 and above), these springs are made of strong and durable spring steel , designed to fit perfectly into the supplied tilting baskets. They are easy to install without tools, improve incubation safety, and ensure a higher hatching rate, even when the machine is partially used.

Rely on original Fiem spare parts , available from Padovan Avicoltura , to maintain high quality standards and protect your eggs at every stage.

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.