Mesh door for Fiem artificial breeder
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting
⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!
At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.
🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!
⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.
💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!
✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.
📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.
🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.
The door locking clips are an essential component for ensuring a perfect seal on the door of Fiem incubators . Designed to provide a secure and stable lock , they prevent heat and humidity loss, helping to maintain ideal incubation conditions.
✔ Compatible with various Fiem incubators
✔ Lever lock for stable and secure fastening
✔ Easy installation and long life
✔ Durable materials for long-lasting use
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Complete tank with floating group for artificial breeder
Original Fiem spare parts from Padovan Avicoltura : ABS casing for MINI-LCD with front panel + FIEM switches + power cable
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.
Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.
Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.
📋 Exploded view ref.: n. 14
📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.
⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.
Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586
📌 Scroll below for a complete technical guide, compatibility, and calibration.
⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!
At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.
🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!
⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.
💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.
✅ Compatible with all Smart and CipCip models with standard European 230V power supply.
📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.
🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.
Original Fiem spare parts for the Axial Fan Motor A3G630AC5258 (MG 2500)
The FIEM 85–110°F precision thermometer, made in Germany, is designed to provide a clearer, simpler, and more immediate temperature reading in incubators. Ideal for everyday use in both professional and amateur settings, it guarantees accuracy and ease of use. Compatible with all FIEM incubators with analog readout, it is a reliable and long-lasting accessory.
✔ Simplified and intuitive temperature reading
✔ Ideal incubation range: 85–110°F
✔ Made in Germany: highest quality and readability
✔ Original Fiem spare part, ready to use
By purchasing this item, you choose reliability, precision, and practicality, improving environmental control in your incubators.
ATTENTION: Please check carefully that the spare part matches the image.
E14 porcelain lamp holder with bracket (Fiem original spare parts)
💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!
At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.
🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!
📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.
⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.
✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.
📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.
🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.
Discover the Q10 mesh shelf with stainless steel frame for the G316 germinator: resistant, practical and perfect for growing sprouts optimally.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK
When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.
Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.
💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.
⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).
Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.
Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.
Original Fiem Spare Parts : Pheasant Incubation Basket, 38x35 cm
Suitable for Fiem MG200 incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Italiano
Deutsch
Español
Français
