ARMOURED RESISTOR 200W FIEM BREEDER

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.

⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!

At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.

🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!

⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.

💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.

✅ Compatible with all Smart and CipCip models with standard European 230V power supply.

📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.

🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.

🔧 The gear motor support is not just a piece of plastic: it is the stable base that keeps the egg turning motor perfectly aligned for smooth and precise movement!

For just €3.36 (excluding VAT) , the SUPP.VOLT. is the plastic support that holds the gearmotor in the correct position inside the Smart. Without an intact and well-positioned support, the gearmotor vibrates, becomes misaligned, and the movement becomes irregular, compromising the delicate turning of the eggs.

⚙️ This mount holds the gear motor at the correct height and angle to transmit power to the egg turning grid. It's specifically designed to absorb vibrations from the motor during continuous operation, preventing premature wear and annoying noises.

⚠️ When should you replace it? If it's cracked or broken, if the gearmotor moves or vibrates excessively, if the plastic is warped from heat or age, if the fastening points are damaged, or if it's missing after maintenance.

💡 A damaged support causes: gearmotor-grid misalignment, premature wear of the coupling, irregular egg movement, abnormal noises during operation.

✅ Specific for the Smart model as indicated in the FIEM price list.

📱 Is the gearmotor vibrating or making noise? Send a photo on WhatsApp.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , every detail counts for perfect automation. 24-month warranty for private individuals, 12 VAT numbers.