⚙️ How does the transparent door work?
The transparent PVC door allows for continuous visual monitoring of the incubation process without having to open the machine. Its function is twofold: to maintain an airtight seal by preventing heat and humidity from escaping, and to ensure maximum visibility of the eggs' condition, allowing for monitoring of embryonic development, proper rotation, and any anomalies without disturbing the internal parameters.
PVC is chosen for its crystal-clear transparency similar to glass but with superior impact resistance, dimensional stability even with temperature fluctuations of 15-40°C, and resistance to constant humidity. With prolonged use, however, exposure to UV rays, repeated contact with detergents during cleaning, and micro-abrasions from opening/closing can cause clouding or progressive deformation, reducing visibility and closing to the point where replacement is necessary.
🔍 When to replace this part
This component should be replaced if you notice one or more of these symptoms:
- ✓ Cloudy or yellowed PVC: you can no longer see the eggs clearly and are forced to open them to check
- ✓ Cracks or breaks: even small cracks compromise thermal and hygroscopic sealing
- ✓ Obvious deformations: warped door that no longer closes flush, leaving drafts
- ✓ Loss of seal: you feel air coming out of the edges
⚠️ Why it happens and what you risk
Clouding of the PVC door is mainly caused by superficial micro-abrasions during cleaning (using abrasive sponges or aggressive detergents), direct exposure to UV rays if the incubator is near windows, and the accumulation of mineral deposits from condensation that settle on the interior surface. In hobbyist breeding facilities, this process takes 6-8 years; in intensive professional use, it can appear as early as 4-5 years.
If you continue to use an opaque door, you'll be forced to open the incubator to check the condition of the eggs: each opening causes an immediate drop in temperature (1-2°C drop) and humidity (10-15%) that takes 15-30 minutes to re-establish. During the critical hatching phase (days 18-21 for chickens), these fluctuations can delay hatching, cause the chick to misplace itself in the egg, or reduce the hatch rate. The cost of the door (€13-19.50) is more than worth it by preventing the loss of even a few chicks.
✅ Compatibility verified
This replacement part is available in two specific sizes. Please check your incubator's model nameplate before ordering.
🔧 Door for CIP CIP 28
Model: CIP CIP 28 (capacity 28 eggs)
Code: PVC DOOR CIP
Price: €13.00 + VAT
🔧 Door for CIP CIP 40
Model: CIP CIP 40 (capacity 40 eggs)
Code: PVC DOOR CIP40
Price: €19.50 + VAT
⚠️ Important note: The two doors are NOT interchangeable. The CIP 28 is smaller and does not cover the opening of the CIP 40, while the CIP 40 door is too large for the CIP 28. Always check the exact model on the nameplate before ordering.
🛡️ How to make it last longer
With minimal maintenance you can significantly extend the life of your PVC door:
- ✓ Every 3 months: clean with a soft microfibre cloth and warm water (never use aggressive detergents or abrasive sponges that scratch the PVC)
- ✓ Every 6 months: check that the side hooks are intact and that the door closes hermetically without drafts
- ✓ During use: open and close gently without forcing, avoid leaving the incubator exposed to direct sunlight which accelerates yellowing
- ✓ ⚠️ DON'T: Never use alcohol, acetone, ammonia, or glass cleaners that dull PVC; do not clean with sandpaper or rough sponges.
📞 Warranty and assistance
✅ 2-year FIEM warranty
Covers manufacturing defects and malfunctions not caused by misuse. If problems arise within 24 months of purchase, the part will be repaired or replaced free of charge.
🔄 Returns within 14 days
If for any reason you change your mind (returns cost money, so make an informed purchase), you can return the product intact and in its original packaging within 14 days of purchase.
📞 Technical support available
Free technical support via WhatsApp, email, or phone for questions about product assembly or operation.
🚀 Fast shipping from the FIEM Como warehouse
Ships within 24 hours - Tracked courier with delivery in 2-4 days throughout Italy.
🔒 100% secure payments
Your banking details are managed directly by the bank and encrypted: we never see or store them.
📱 ATTENTION
Please carefully check the model (CIP CIP 28 or CIP CIP 40) before ordering. The two doors are NOT interchangeable. If you have any questions, please contact us via WhatsApp:
- ✓ A photo of the complete incubator
- ✓ A photo of the label on the back of the incubator
- ✓ A photo of the current door (for size comparison)
This way we can confirm the correct size for you. Thank you!
📞 Need help?
🛒 Order now or ask for information
📞 WhatsApp: 351 881 9586
📧 Email: info@padovanavicoltura.it
📋 Legal Notice and Rights
© 2025 Padovan Avicoltura. All rights reserved.
PLAGIARISM PROHIBITED: Total or partial reproduction of this text/data on other websites is monitored and will be legally prosecuted (DMCA and Law 633/41) without notice.
Italiano
Deutsch
Español
Français
