FIEM COSMO 12/220V TRANSFORMER: the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
SECURE PAYMENT METHODSCash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTSItaly offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free ConsultationPre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Fiem temperature probe for ELTP1 thermostat: precise temperature measurement for successful incubation.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
COMPLETE ELECTROMECHANICAL ALARM THERMOMETER: the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.
Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.
Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.
📋 Exploded view ref.: n. 14
📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.
⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.
Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586
📌 Scroll below for a complete technical guide, compatibility, and calibration.
LCD HUMIDITY SENSOR + CABLE AND CASE
🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!
At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.
⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.
🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.
💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.
✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.
📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .
🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital Thermostat 1 + Probe (Fiem Spare Parts) . Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to keep your incubator always in working order, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital thermostat probe. Only at Padovan Avicoltura will you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and after-sales consulting service, and user assistance to help you get the most out of your incubator.
Original Fiem Spare Parts. Only at Padovan Avicoltura can you find all original Fiem spare parts.
Original Fiem spare parts from Padovan Avicoltura : ABS casing for MINI-LCD with front panel + FIEM switches + power cable
The electronic control unit with large backlit LCD display allows you to manage a whole series of advanced parameters with extreme ease of use.
🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!
At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.
⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.
⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.
💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!
✅ Compatible with Smart and Cosmo , standard for power cable passage.
📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.
🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane
Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.
Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.
Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks
⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.
Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como
Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586
📌 Scroll below for technical guidance, compatibility chart, and assembly.
The FIEM Advanced Mini LED Control Unit is the perfect digital heart for those seeking precision, simplicity, and reliability in incubation. The self-calibrating digital sensor ensures accurate readings within ±0.1°C and ±1.5% RH, ensuring ideal conditions for hatching.
It is the ideal choice for hobbyists, small breeders, beekeepers and enthusiasts who want to improve their success rates without technical complications.
Why choose it?
What customers say: Users praise its intuitive operation, precise climate control, and solid construction. One customer writes: "I use it on an MG50: precise, quiet, and reliable." Reviews on forums and e-commerce sites confirm its high popularity among breeders.
FIEM COMO WAREHOUSE – Only original FIEM spare parts to ensure the long-term efficiency of your incubator.
Compatibility: CIP CIP 28/40, MG50, MG70, MG100, API Series
Includes: Complete control unit + T/H (temperature/humidity) probe 230V
👉 Perfect for those looking for a simple yet precise digital control unit, for effective and worry-free incubation.
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.
FIEM 230V MAXIMUM TEMPERATURE ALARM MICRO SWITCH: the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.
Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.
💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.
⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).
Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.
Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.
ATTENTION: PRODUCT DISCONTINUED
The original Fiem control unit is no longer available. It has been replaced by the manufacturer with an upgrade kit that includes the new control unit and specific wiring harness for the adaptation.
[Link to the new replacement kit]
ADVICE BEFORE PURCHASE
Since this is a repair on incubators that have been in service for many years, we recommend carefully evaluating the overall condition of the machine. Consider whether repair costs are the most cost-effective option in the long run, or whether investing in replacing the entire incubator is more cost-effective.
Italiano 
Deutsch 
Español 
Français 
