FIEM Easy-Read Precision Thermohygrometer 60–95°F - Made in Germany - For Fiem Incubators

Discover the Q10 mesh shelf with stainless steel frame for the G316 germinator: resistant, practical and perfect for growing sprouts optimally.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

Original Fiem spare parts from Padovan Avicoltura : Digital thermostat for Fiem Smart incubator + sensor.  Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Fiem Spare Parts from Padovan Avicoltura : Professional Red Partridge Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.

Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP

Fiem AIR CONDITIONED AA -68/24 Exotic Spare Parts and Options for MG50

Original Fiem spare parts from Padovan Avicoltura : Egg turning gear motor without bracket for Fiem MG 70-100-140-200-320 incubators

Original Fiem spare parts for the Axial Fan Motor A3G630AC5258 (MG 2500)

Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting

Very powerful professional egg candling lamp with maximum candling precision. Pair with a Fiem product.

IM 35 Power Lux : professional cold light egg candler with multiplication lens, 220-240V power supply.

After the eighth to tenth day of incubation, it's a good idea to candle the eggs to identify and eliminate any unfertilized eggs. For this purpose, we recommend the following egg candling models.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray

A customer from Rovigo called me: "The Limpia humidifier is constantly turning on and off, the humidity fluctuates, and the pheasant eggs are drying out." The IEC socket on the panel had oxidized contacts and was making poor contact. Simply moving the cable would shut off the humidifier. I replaced the socket, and it's been working perfectly for 18 months.

When is it needed? If the humidifier doesn't turn on even when plugged in , it turns on and off intermittently, or you see sparks when you plug it in. If the socket has burnt plastic or oxidized contacts, it should be replaced immediately to avoid a fire risk.

What is an IEC socket? It's an international standard (type C14 female)—the same connector found on PCs, monitors, and professional appliances. It guarantees safe connections up to 250V and 10A.

⚠️ Before ordering: Unplug everything, visually inspect the socket (are the contacts shiny or oxidized/black?), test the IEC cable on another device to rule out the cable as the problem.

📸 Not sure? Send us a photo of the IEC socket (focus on the inside) on WhatsApp and describe the symptoms.

Installation: 230V electrical work – Qualified technicians ONLY . If you're not an electrician, hire a professional.

💰 Price: €1.47 – FIEM WAREHOUSE COMO

Compatibility: FIEM Limpia humidifier and other FIEM devices with standard IEC connection.

Minimum order €20: Complete with 5L tank (€8.82) + Tube (€1.89/m) + Bushing (€0.84) + Float (€5.04).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.

When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.

Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam

💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.

Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.

⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).

Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

METAL DAMPER FOR CO2 EXPULSION ORIGINAL FIEM SPARE PARTS