Fiem MG70-100-140-200-320 gearmotor for turning eggs without bracket

Reference: 117/d - Brand: FIEM
€50.02
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Original Fiem spare parts from Padovan Avicoltura : Egg turning gear motor without bracket for Fiem MG 70-100-140-200-320 incubators

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

16 other products in the same category:

ABS Thermometer Holder for Fiem Cip Cip 28 and...

€0.65
Availability: 1000 In Stock

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.

Front Panel for Miniled, Miniled Advanced, Evo...

€20.25
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

📌 Scroll below for technical guidance, compatibility chart, and assembly.

CIP 28 Metal Support for Humidity Trays

€5.49
Availability: 1000 In Stock
CIP 28 Metal Humidity Tray Support – The bracket that holds the 2 water trays in place. This metal support ensures stability and proper positioning of the humidity trays inside the incubator.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Fiem Carrier for 50 Royal Cells

€499.00 €469.00 -€30.00
Availability: 99 In Stock

The Fiem royal cell transporter is designed to ensure optimal climatic conditions during the transport of royal cells, ensuring simple and reliable operation.

Benefits for the buyer:

  • Optimal protection: The insulated structure maintains a constant temperature, protecting the royal cells during transport.
  • Power Flexibility: Can be powered either by a 12V cigarette lighter socket or an external battery, offering versatility in different situations.
  • Adequate capacity: With two 25-cell carriers, it allows for the simultaneous transport of up to 50 real cells, optimizing operations.
  • Precise Control: The digital temperature controller allows you to set the temperature precisely, ensuring ideal conditions for real cells.

FIEM square net mat for breeder...

€5.50
Availability: 107 In Stock

FIEM square net mat for breeder (pheasant-partridge) dimensions 50x100 cm, 5x5 mm mesh.

Original Fiem spare parts: square mesh mat, 50x100 cm, 5x5 mm mesh, perfect for raising pheasants and partridges. Guarantees maximum strength and durability.

Please carefully check that the required part matches the image provided. If you have any questions or are having trouble finding the part you need, please send us a photo of the part you need via WhatsApp. Thank you.

Cable Gland for Power Cable Fiem Smart and Cosmo

€0.77
Availability: 1000 In Stock

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

Hatchery Tray 38x45 cm for Hatching Unit MG...

€35.30
Availability: 103 In Stock

Original Spare Parts for Fiem Incubators : 38x45 cm metal hatching tray for the hatching compartment on the Fiem MG 100/150 (old model) and Fiem MG 140/200 (old model) incubators. The plastic tray is not suitable for models released after 2020. If you want to add a hatching tray to the incubation compartment, use the 38x35 cm tray.

For the incubation department, take the 38x35 model (code 56) or for the post 2020 model the plastic boxes (code cass.plast.100)

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

123W Silicone Heating Element (R75C) for Smart...

€12.08
Availability: 1000 In Stock

🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!

At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.

⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.

⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.

💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!

Compatible exclusively with Smart as indicated in the price list.

📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.

Adjustable egg turning grid for Fiem Cosmo...

€70.64
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔄 The automatic hand that imitates a hen.
This grid is the heart of the turning system: it houses the inserts that separate the eggs into neat rows and, connected to the gearmotor, makes them roll gently back and forth, just like a hen in her nest.

Quick diagnosis: eggs that do not rotate, bent or deformed grid, inserts that do not stay in place, jerky or incomplete movement.

Solution: Original FIEM Adjustable Insert Egg Turning Grid, specifically for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Brescia with a COSMO EVO had the original grid warped after 6 years of intensive use. The eggs no longer rolled evenly, and hatching rates had dropped. He replaced the grid in 10 minutes, and the next cycle brought the hatching rate back to 85%.

⚠️ When to replace it: If you notice warping, cracks, or the inserts no longer staying in place, it's time to replace it. A damaged grid compromises the voltage and drastically reduces hatching rates.

Essential data:
💶 Price: €52.50 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: 1/3/5
📋 Exploded view ref.: n. 1
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.