Original Spare Parts for Fiem Incubators from Padovan Avicoltura Resistance for Fiem Inca Incubator : Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.
New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).
Stainless Steel Pollen Drying Tray with Mesh for A50
When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.
Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.
Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.
Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.
💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.
Compatibility: Universal - works with any forced-air or still-air incubator
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!
It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.
💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.
⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.
📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.
✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.
🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).
📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.
🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.
💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!
At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.
🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!
📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.
⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.
✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.
📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.
🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.
Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.
Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.
⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.
Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting
Digital scale in the shape of a measuring spoon 0.1g - model WS500S useful and practical for weighing 1 single egg.
🛡️ The fan guard isn't just a safety net: it's what prevents accidental contact with the moving blades and protects the fan itself from feathers and debris!
At €9.45 (excluding VAT) , the PROT.SMART is the protective metal mesh that covers the fan of your Smart incubator. It's not an optional accessory: it prevents objects, feathers, or worse, curious fingers from coming into contact with the rotating blades, and at the same time prevents debris from obstructing the fan and compromising ventilation.
🔧 This protective grille maintains optimal airflow while filtering out large particles that could damage the engine. The mesh is sized for maximum protection without impeding vital air circulation for embryos.
⚠️ When should you replace it? If the mesh is broken or bent, leaving dangerous gaps, if the mesh is warped and no longer fits properly, if it's rusted or corroded, or if it's missing after maintenance.
💡 Using the incubator without the protective grille is dangerous and can cause damage to the fan if objects enter the blades.
✅ Compatible with the Smart model as indicated in the FIEM price list.
📱 Is your grill damaged? Send us a photo on WhatsApp to check compatibility.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , safety in every detail. 24-month warranty for private individuals, 12 VAT numbers.
Original Fiem spare parts for roller rubber. For the MG50BIRD-COLIBRI drawer.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🏠 The foundation on which the entire incubator rests.
The COSMO base is the lower ABS shell that contains the humidity trays, supports the support mesh, and holds up the entire structure. If it cracks or breaks, you lose its watertightness, moisture retention, and stability.
Quick diagnosis: visible cracks, water leaks from the trays, body deformed by heat, breaks at the corners or attachment points.
Solution: Original FIEM COSMO primer in high-strength ABS. Compatible with COSMO, COSMO EVO, and COSMO ML.
📌 Real case: A customer in Vicenza with a COSMO incubator had a cracked bottom after 8 years of use. Water leaked from the trays, and the humidity never rose above 40%. After replacing the bottom, the incubator returned to working perfectly with stable humidity.
⚠️ When to replace it: If you notice cracks, warping, or water leaks, the bottom should be replaced. A damaged shell compromises airtightness and humidity, ruining entire broods.
Essential data:
💶 Price: €50.72 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FONDO COSMO
📋 Exploded view ref.: n. 5
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Extended SEO Description (max 1000 characters):
The 40x60 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.
Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.
Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.
⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.
Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Gentili e preparati, davvero ottimo servizio
Ho trovato persone all'altezza di tutto sia per attrezzature nuove sia per ricambi, sempre disponibili nel dare consigli e informazioni, qualità davvero eccellente, grazie
Italiano
Deutsch
Español
Français
