🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!
At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.
⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.
⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.
💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!
✅ Compatible exclusively with Smart as indicated in the price list.
📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Replace the heating element when: temperature does not reach 100°F, slow or uneven heating, visible black spots on the wire, cracks in the silicone insulation, abnormal power consumption, after years of continuous use, thermostat always on without reaching temperature.
Check: the thermostat is working and properly calibrated, the fan is distributing air, the 230V power supply is present, and the fuse is intact. If everything is OK but the heater isn't heating, replace the heating element.
| Code | R75C |
| Description | Silicone Heating Cable |
| Length | 1.60 meters |
| Resistence | 245 Ohm/meter |
| Power | 123W |
| Coating | Heat-resistant silicone |
| Exploded | No. 16 |
| Price | €9.90 excluding VAT |
DANGER: ALWAYS DISCONNECT POWER! 230V present! Remove the old resistor, noting the arrangement. Install the new one following the same path. Tighten the terminal connections. No contact between the coils. Check insulation before applying power. Gradual temperature test.
Silicone insulation ensures: humidity resistance, installation flexibility, durability, electrical safety, and performance maintenance. 245 Ohm/m specifications calibrated for an optimal 37.7°C.
Required for: warehouse management, electrical component testing, antistatic packaging, administration, tracked shipping.
Compatible with CipCip?
No, R75C is specific for Smart.
Can I repair it if it's damaged?
Never! Risk of short circuit/fire. Always replace.
Difficult to install?
Requires electrical skills. Qualified electrician.
© 2025 Padovan Avicoltura. FIEM distributor. Safety components. Prices exclude VAT, 24-month warranty for private individuals/12 VAT numbers.
Original Spare Parts for Fiem Incubators : Power Cable. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.
Original Fiem Spare Parts : Incubation Basket for GOOSE, size 38x50 cm
Capacity approximately 15 goose eggs suitable for mg200 incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Want to request information or clarification directly via WhatsApp? Click HERE (WHATSAPP).
💧 The semi-automatic humidification kit is an intelligent system that regulates humidity by rotating a bottle, without ever opening the incubator!
At €26.50 (excluding VAT) , the KIT.UM.SMART (component no. 15 in the exploded view) revolutionizes humidity management. It includes a bottle tank, support base, and connection tube, but the genius lies in the control: by screwing the tank, you progressively activate 1-2-3-4 water sectors in the Smart base, unscrewing them to reduce them to 4-3-2-1. Adjust the humidity from 38% to 62% simply by rotating an external bottle!
🎯 How does it work? The variable surface system is ingenious: screw in to increase the flooded sectors (more evaporation = more humidity), unscrew to reduce them. No openings, no temperature changes, total control! During incubation, you need 2 sectors (47-52%), for hatching you activate 4 (62%). Everything from the outside!
⚠️ When should you replace it? If the tank leaks, the sector adjustment mechanism no longer works, the hose is clogged, or if you want to add this intelligent automation to your Smart (only on compatible models).
💡 Revolutionary FIEM system: instead of opening the door twice a day, causing 2-3°C swings, you can adjust everything from the outside. Absolute professionalism!
✅ Compatible with Smart equipped with a 4-sector base (n°4) and pre-arranged lid (n°14).
📱 Want this revolution? Contact us on WhatsApp
🚚 Shipping from Como in 1 day. No minimum order. FIEM since 1975 , innovation for superior results. 24-month warranty for private individuals, 12 VAT numbers.
Original Fiem Spare Parts from Padovan Aviculture : Plato holder for 50 professional turkey duck eggs for Fiem astral series incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 E VICTORIA SERIES
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.
Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP
Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
Spare Parts and Exotic Options Fiem Timer Programming Working Temperature or Lights
🔝 The clear lid isn't just a window onto your eggs: it's the thermal barrier that keeps temperature and humidity stable, determining the success of your hatchings!
At €30.50 (excluding VAT) , the Smart Lid (part #14 in the exploded view) is much more than just a clear plastic cover. It's designed to create the perfect climate chamber that maintains a constant 37.7°C and the necessary humidity, while allowing you to observe development without constantly opening the lid.
🌡️ The transparency of the material is no accident: it allows you to visually check the thermometer and eggs without losing heat. Any unnecessary opening can cause fluctuations of 2-3°C, which slows embryonic development, which is why an intact and well-sealed lid is essential.
⚠️ When should you replace it? If it has cracks or breaks, even small ones, that cause heat and moisture leaks. If the plastic is cloudy from years of use and you can't see clearly inside. If it no longer seals tightly, leaving gaps. If it has been deformed by excessive heat or impacts.
🔧 As the manual indicates, during the last two days of hatching, the lid must be kept tightly closed to maintain humidity at 62%. It's tempting to open the lid to watch the chicks hatch, but each opening compromises subsequent hatchings!
✅ Compatible exclusively with the Smart model . The specific design with the correct curvature ensures optimal air circulation studied by FIEM.
📱 Not sure about the condition of your lid? Send us photos of the complete incubator and lid from various angles on WhatsApp .
🚚 Protected shipping from Como in 1 business day. Reinforced packaging to prevent breakage. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.
500W nickel-chrome heating element (Fiem original spare parts)
METAL DAMPER FOR CO2 EXPULSION ORIGINAL FIEM SPARE PARTS
💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)
The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.
🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.
⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.
💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!
✅ Compatible with FIEM humidity probes .
📱 Problems with humidity readings? Send photos on WhatsApp
🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.
Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.
Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.
⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.
Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
⚡ Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.
The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.
✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
The 40x40 brass flat hinge is an essential component for the proper functioning of Fiem incubator doors. Made of durable brass , it ensures a secure and long-lasting closure, preventing deformation and wear over time. Ideal for replacing damaged hinges and restoring full functionality to your incubator.
✔ 40x40mm dimensions for perfect compatibility
✔ Corrosion-resistant brass material
✔ Smooth movement for optimal opening and closing
✔ Easy installation with stable fixing
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.
Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.
Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.
⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.
Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Italiano
Deutsch
Español
Français
