Fiem Smart Transparent Lid (Exploded View 14)

Water dispenser for Fiem hygrometer

Mesh door for Fiem artificial breeder

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for a complete technical guide, compatibility, and calibration.

4W LED bulb with E14 socket (Fiem original spare parts)

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Bipolar Switch

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.

✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models

By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.

ATTENTION: Please check carefully that the spare part matches the image.

Original spare parts for Fiem incubators from Padovan Avicoltura : Single-pole switch. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

ATTENTION: PRODUCT DISCONTINUED

The original Fiem control unit is no longer available. It has been replaced by the manufacturer with an upgrade kit that includes the new control unit and specific wiring harness for the adaptation.

[Link to the new replacement kit]

ADVICE BEFORE PURCHASE

Since this is a repair on incubators that have been in service for many years, we recommend carefully evaluating the overall condition of the machine. Consider whether repair costs are the most cost-effective option in the long run, or whether investing in replacing the entire incubator is more cost-effective.

POWER SUPPLY 7.0 A-12/220V + cigarette lighter plug (JOLLY25 + PORTABLE NEST): the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Original Spare Parts for Fiem Incubators : 38x45 cm metal hatching tray for the hatching compartment on the Fiem MG 100/150 (old model) and Fiem MG 140/200 (old model) incubators. The plastic tray is not suitable for models released after 2020. If you want to add a hatching tray to the incubation compartment, use the 38x35 cm tray.

For the incubation department, take the 38x35 model (code 56) or for the post 2020 model the plastic boxes (code cass.plast.100)

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

Glutarsan is one of the most popular professional disinfectants in the poultry industry , widely used for sanitizing incubators and breeding facilities . Online reviews confirm its high efficacy against viruses, bacteria, and fungi , with rapid action times and no corrosive effect on materials. It is considered a safe, powerful, and versatile solution , ideal for maintaining high hygiene standards throughout the entire incubation cycle.
Recommended directly by FIEM , it proves to be the ideal choice for those who want complete protection and certified reliability .
Our opinion? An indispensable product for anyone working with chicks, fertile eggs, and environments with high microbial density. A must-have for hatcheries and farms!

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Ultrasonic humidifier water filter

COMPLETE EGG TURNER GEAR MOTOR (MG50)

Very powerful professional egg candling lamp with maximum candling precision. Pair with a Fiem product.

IM 35 Power Lux : professional cold light egg candler with multiplication lens, 220-240V power supply.

After the eighth to tenth day of incubation, it's a good idea to candle the eggs to identify and eliminate any unfertilized eggs. For this purpose, we recommend the following egg candling models.