POWER SUPPLY 7.0 A-12/220V + cigarette lighter plug (JOLLY25 + PORTABLE NEST): the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original spare parts for Fiem incubators from Padovan Avicoltura : 500 W armored heating element - (MG800H). Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Bipolar Switch
Spare Parts and Exotic Options Fiem Incubation Tray Complete with cylindrical inserts mg50 and Colibri
VOLTAGE ACTUATOR SIR S073-230V c162mm + support + crosspiece
The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.
✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models
By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.
ATTENTION: Please check carefully that the spare part matches the image.
COMPLETE EGG TURNER KIT for SMART MAN.
Original Fiem spare parts : Plastic cover for hatching drawer Fiem MG244-316-300-320 incubator S316 hatching
To be combined with plastic hatching drawer (code CASS.56020001)
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.
When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.
💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Compatibility: FIEM control units (MiniLED, Advanced and digital models).
Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.
Available in the sensor-only version or complete with sensor + protection + cable
Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.
Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.
Slight decimal fluctuations are within the normal characteristics of this type of sensor.
⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.
Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
📋 Exploded view ref.: Varies depending on the model
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."
When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.
How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.
Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
💡 More info? Read the description below.
Original Fiem Spare Parts. Only at Padovan Avicoltura can you find all original Fiem spare parts.
The transparent door window with gray support is an essential spare part for Fiem incubators, designed to ensure optimal visibility inside the machine without compromising its thermal insulation . The gray support ensures stable attachment, while the transparent material allows you to easily monitor the incubation process.
✔ Compatible with Fiem incubators
✔ Transparent material for immediate incubation control
✔ Sturdy grey stand for stable fixing
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and optimal performance for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :
Optional Fiem Climatic Chambers electromechanical thermostat (maximum temperature alarm)
When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.
💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.
Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
🔧 The gear motor support is not just a piece of plastic: it is the stable base that keeps the egg turning motor perfectly aligned for smooth and precise movement!
For just €3.36 (excluding VAT) , the SUPP.VOLT. is the plastic support that holds the gearmotor in the correct position inside the Smart. Without an intact and well-positioned support, the gearmotor vibrates, becomes misaligned, and the movement becomes irregular, compromising the delicate turning of the eggs.
⚙️ This mount holds the gear motor at the correct height and angle to transmit power to the egg turning grid. It's specifically designed to absorb vibrations from the motor during continuous operation, preventing premature wear and annoying noises.
⚠️ When should you replace it? If it's cracked or broken, if the gearmotor moves or vibrates excessively, if the plastic is warped from heat or age, if the fastening points are damaged, or if it's missing after maintenance.
💡 A damaged support causes: gearmotor-grid misalignment, premature wear of the coupling, irregular egg movement, abnormal noises during operation.
✅ Specific for the Smart model as indicated in the FIEM price list.
📱 Is the gearmotor vibrating or making noise? Send a photo on WhatsApp.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , every detail counts for perfect automation. 24-month warranty for private individuals, 12 VAT numbers.
Italiano
Deutsch
Español
Français
