SIR S073-230V egg turning actuator c162mm

254mm DIAM. ALUMINUM FAN (MG200-244-316-320)

EGG TURNER TIMER (MG432-576-720)

A breeder in Treviso contacted me about a strange noise from his CIP 28 incubator: "It sounds like something is scratching the fan blades." Upon opening the incubator, we found the protective mesh was deformed and touching the fan with each rotation. After replacing the mesh, the problem went away, and incubation continued without a hitch.

When is it needed? If you notice rubbing noises, the mesh probably needs replacing. Even after aggressive cleaning with corrosive products , or if the mesh appears visibly rusted, deformed, or has loosened meshes, it's time to replace it.

⚠️ ATTENTION WHEN ORDERING: There are two versions – always specify whether you need it for CIP CIP 28 or CIP CIP 40 when ordering. The dimensions are different and are not interchangeable.

📸 Not sure which model you have? Send us a photo of the incubator's identification plate (located on the back) on WhatsApp – we'll immediately confirm which network you need.

Installation: Quick and easy. Always unplug before opening. The net is attached with just a few screws; no electrician required.

💰 Price CIP CIP 28 and 40: €10.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Consider adding other maintenance parts (fuse, thermometer, humidity trays) to complete your order and reach the minimum threshold.

📦 Logistics: Ships within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM, leader in artificial incubation since 1975.

FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK

Original Fiem Spare Parts from Padovan Poultry Farming : MG100/150 Fan Protection Net

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

The FIEM precision thermometer in degrees Celsius (+20/+40°C) is an essential accessory for monitoring the temperature in Fiem Smart incubators. It offers a clear and reliable reading, specifically calibrated for the optimal incubation range. This model is designed to ensure maximum compatibility with the Smart incubation chamber.

✔ Analogue temperature reading from +20°C to +40°C
✔ Compatible with Fiem Smart incubators
✔ High precision for thermal control during incubation
✔ Original Fiem spare part, easy to install

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please contact us via WhatsApp:
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Fiem 1.5m tank-float connection tube for semi-automatic humidity control

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 140W armored heating element (MG100H - MG 200H). Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

The FIEM 85–110°F precision thermometer, made in Germany, is designed to provide a clearer, simpler, and more immediate temperature reading in incubators. Ideal for everyday use in both professional and amateur settings, it guarantees accuracy and ease of use. Compatible with all FIEM incubators with analog readout, it is a reliable and long-lasting accessory.

✔ Simplified and intuitive temperature reading
✔ Ideal incubation range: 85–110°F
✔ Made in Germany: highest quality and readability
✔ Original Fiem spare part, ready to use

By purchasing this item, you choose reliability, precision, and practicality, improving environmental control in your incubators.

ATTENTION: Please check carefully that the spare part matches the image.

Original Fiem Spare Parts : Incubation Basket for GOOSE, size 38x50 cm

Capacity approximately 15 goose eggs suitable for mg200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to request information or clarification directly via WhatsApp? Click HERE (WHATSAPP).

Red LED bulb for Fiem breeder

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 170 eggs, professional quail and partridge for Fiem incubators, astral series MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS