Fiem 40x60cm Embossed Paper Mat for Hatching Tray – Original Replacement

⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!

At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.

🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!

⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.

💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.

✅ Compatible with all Smart and CipCip models with standard European 230V power supply.

📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.

🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.

🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!

At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.

⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.

🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.

⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.

✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.

📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.

🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.

🥚 The 32/A egg turning grid is not a simple divider: it is the system that gently rolls the eggs, replicating the natural movement of the hen!

At €9.98 (excluding VAT) , this grid (part no. 8 in the exploded view) neatly divides the rows of eggs and, connected to the tensioning system, rolls them with precision. Just like a mother hen turns each egg with her beak several times a day, this grid, moving back and forth for 30 minutes, gently rolls each egg, preventing the embryo from sticking to the shell.

🔄 Movement is vital: without regular rotation, the embryo adheres to the internal membrane and dies. As specified in the FIEM manual, the gearmotor moves the grid in hourly cycles (30 minutes forward, 30 minutes backward), causing the eggs to roll on their axis. It's this constant action that increases hatching rates from 20% without voltage to 80-90% with the correct voltage!

⚠️ When should you replace it? If the dividers are bent and the eggs don't roll evenly, if it no longer engages the gearmotor pin, if it has breaks that block some eggs, or if wear and tear after many cycles compromises the smooth movement.

💡 The dividers are not random: they keep the eggs at the right distance to roll without bumping into each other, organize the space for maximum capacity, and ensure that each egg receives the necessary movement.

✅ Compatible with Smart only , designed for Smart automatic or manual voltage system.

📱 Eggs not rolling properly? Send a WhatsApp video of the movement for immediate diagnosis.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , natural movement for excellent results. 24-month warranty for private individuals, 12 VAT numbers.

🥚 The Smart net is not a simple shelf: it is the perforated technical floor that supports the eggs allowing perfect circulation of air and humidity from below!

At €9.70 (excluding VAT) , the SMART PL. NET (component no. 11 in the exploded view) is the support grid where you place your eggs. Its perforated structure is not random: it allows warm air to circulate evenly from bottom to top and the humidity from the four sectors below to evaporate, reaching the eggs, creating the perfect microclimate essential for embryonic development.

💨 As the FIEM manual specifies, air circulation is as crucial as temperature. Hot air rises through the mesh, enveloping each egg evenly, while the moisture evaporating from the trays at the base passes through the grill, maintaining the proper 47-62% ratio needed for the various stages.

⚠️ When should you replace it? If the mesh is broken or warped, compromising the egg holder, if the plastic is bent, creating unevenness, if it's clogged with debris blocking airflow, or after several cycles, when thorough cleaning is required.

💡 The mesh size is designed to hold eggs of various sizes (from quail to goose), always ensuring optimal airflow and humidity. Without this perforated grid, you wouldn't have the necessary ventilation!

✅ Compatible exclusively with the Smart model . Specific dimensions and design to fit perfectly into the structure.

📱 Not sure about your network conditions? Send photos on WhatsApp for instant verification.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , components designed for professional results. 24-month warranty for private individuals, 12 VAT numbers.