Fiem Smart Automatic Egg Turning Grid (Exploded View 8) / Turning Grid

🔌 The caps that close the internal holes and maintain insulation.
COSMO internal plugs are small plastic inserts that seal the fixing holes and openings in the bottom shell. They prevent heat and humidity loss, maintaining a stable incubation environment.

Quick diagnosis: missing, broken, or loose caps, open holes in the body, cold air drafts from below.

Solution: Original FIEM internal caps for the lower body of COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer from Rovigo noticed unstable temperatures in his COSMO EVO. After checking the control unit and heating element, he discovered that two caps on the bottom were missing. He replaced them and the problem was immediately solved.

⚠️ When to replace them: If the caps are missing or broken, cold air enters from the bottom and hot air escapes. These may seem like small details, but they make a difference in thermal stability.

Essential data:
💶 Price: €0.74 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: CAPS
📋 Exploded view ref.: n. 11
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.

Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.

Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.

⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.

Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.

Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.

Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.

⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.

Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586