ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
    ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
    ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
    ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
      ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
      ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
      ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart
      ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart

    ABS Thermometer Holder for Fiem Cip Cip 28 and 40 and Smart (17A explosion on cip)

    Reference: CLIP T/H (17/A) - Brand: FIEM
    €0.65
    Tax included
    Non ci sono ancora recensioni
    normalmente 2/4 giorni feriali

    🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

    It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

    💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

    ⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

    📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

    ✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

    🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

    📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

    🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.

    Quantity
    Add to wishlist
    In Stock

      SECURE PAYMENT METHODS

    Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

      SHIPPING COSTS

    Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

      Free Consultation

    Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

    SPEDIZIONE A COSTO FISSO

    Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

    📋 Full Description - 17A Thermometer Holder Clip

    ⚙️ Compatibility: Smart, CipCip 28, CipCip 40 (all versions)
    📍 Code: 17A / T/H clip | 💶 Price: €0.53 excluding VAT
    ⚠️ Minimum order required: €20 excluding VAT

    🔍 When You Need This Replacement Part

    The clip should be replaced when: the thermometer doesn't stay in place, moves during the egg turning cycle, falls inside the incubator, has visible cracks or breaks in the ABS plastic, or requires tape or other means to hold the thermometer in place. If you notice any of these problems, it's time to replace the clip to ensure reliable readings.

    🛠️ First Try This

    Make sure you're inserting the thermometer correctly, as indicated in the FIEM manual: always insert it from the bottom up with a slight rotation, never from the front. If the problem persists even when inserted correctly, the clip actually needs to be replaced.

    📊 Technical Specifications

    Spare part code 17A / T/H clip
    Price list description ABS THERMOMETER HOLDER
    Material ABS
    Compatible with thermometer 05/A
    Incubator models Smart, CipCip 28, CipCip 40
    Unit price €0.53 excluding VAT

    ⚡ Safe Installation

    There's no need to unplug the incubator for this operation. Remove the old clip if present and damaged. Place the new 17A clip in its place. Insert the thermometer following the instructions in the manual: from bottom to top with a gentle rotation, never force it from the front. Make sure the thermometer is stable and positioned with the bulb in the center of the eggs as indicated in the manual.

    ❌ Common Mistakes to Avoid

    • Insert the thermometer from the front instead of from the bottom with rotation
    • Force insertion and risk breaking the new clip
    • Continuing to use a damaged clip will compromise readings
    • Do not check the stability of the thermometer after installation

    🔗 Related Spare Parts

    To reach the minimum order of €20: 05/A Temperature reading thermometer (€22.05) already exceeds the threshold on its own, TERMINALS COVER. Terminal protection (€1.90) , P67 Cable gland (€0.63) , DIG KEYBOARD Keyboard membrane (€2.80) . Or buy more spare clips given their usefulness and minimum price.

    💬 Minimum Order: Transparency on Logistics Costs

    For spare parts orders, a minimum order amount of €20 (excluding VAT and shipping) is required. This threshold covers the operating costs that make the service possible:

    • Search and collection time – Each component (e.g. this €0.53 clip) must be located in the FIEM warehouse among thousands of references, visually checked for integrity and carefully extracted
    • Packaging – Adequate protection to avoid damage during transport
    • Administrative management – Invoice issuance, tax registration, inventory control, management system updates
    • Tracked courier organization – Pickup booking, tracking label generation, customer notification, and delivery problem management
    💡 Tip: Visit the best-selling products category to easily reach €20 and optimize shipping.

    📦 Delivery Times

    Ships within 1 business day from FIEM's Como headquarters. Delivery within 2-4 business days throughout Italy.

    ❓ FAQ - Frequently Asked Questions

    Can I order just one €0.53 clip?
    No, there's a minimum order of €20 excluding VAT. Add more spare parts or purchase more spare clips.

    Is the clip the same for all FIEM models?
    Yes, the 17A is identical and compatible with the Smart, CipCip 28 and CipCip 40.

    How do I know if my clip is broken?
    If the thermometer does not stay still, moves or you need to secure it with other means, the clip needs to be replaced.

    How many clips should I order?
    Given the minimal cost, consider buying at least 5-10 pieces to have a long-term supply.

    Does the thermometer still fall off even with the new clip?
    Make sure you insert it correctly, rotating it from bottom to top. If the problem persists, the thermometer may be damaged.

    📱 Technical Assistance
    Send photos of incubator, current clip and thermometer on WhatsApp
    We will reply to you shortly during business hours

    © 2025 Padovan Avicoltura - Official FIEM distributor. Original content protected. Technical data verified on FIEM documentation. Prices exclude VAT, 24-month warranty for private customers/12-month warranty for VAT number.

    CLIP T/H (17/A)

    16 other products in the same category:

    Fiem Smart 130-B Gear Motor Cover | Egg Turner Protection
      FIEM

      Fiem Smart Gearmotor Protection Cover / Plastic...

      €6.54
      Availability: 1000 In Stock

      🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!

      At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.

      🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.

      ⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.

      💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!

      ✅ Specific for Smart , designed to perfectly close the gearmotor compartment.

      📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.

      🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.

      Fiem Smart, Cosmo, Inca, Cip Cip, MG50 Egg Turning Gear Motor
        FIEM

        Egg Turning Gear Motor for Fiem Smart, Cosmo,...

        €53.68
        Availability: 198 In Stock

        The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
        Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
        By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

        ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
        ✅ A photo of the required spare part
        ✅ A photo of the incubator
        ✅ A photo of the label on the back of the incubator
        This way we can help you more quickly. Thank you!

        Transparent PVC Door Cip cip 28/40
          FIEM

          Transparent PVC Door Cip cip 28/40

          €15.86
          Availability: Out of stock

          ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

          🪟 The transparent window that lets you check without opening.
          When it has cracks, clouding or warping, you lose visibility and risk heat and humidity losses.

          Quick diagnosis: opaque PVC, cracks, door that doesn't close tightly, or warping. Every opening disrupts critical parameters.

          Solution: FIEM transparent PVC door for CIP 28 and 40. Watertight and maximum visibility. Lifespan: 6–8 years.

          📌 Real case: Treviso breeder with CIP 40, door warped and unable to maintain proper humidity. Replaced, humidity perfect, hatching improved.

          ⚠️ When to replace: at the first signs of clouding. Opening the egg frequently reduces hatching.

          Essential data:
          💶 Price:
          • CIP CIP 28: €13.00 + VAT
          • CIP CIP 40: €19.50 + VAT
          🔧 Compatibility: CIP CIP 28 or 40
          🏷️ Code: PVC DOOR CIP 28/40
          📦 Availability: IN STOCK – Shipping within 24 hours (railways)

          Any doubts? Photo of the tag on WhatsApp: 351 881 9586

          💬 Minimum order €20 (VAT included)

          For orders under €20 including VAT (CIP 28 model), reach the minimum amount by adding additional items. The CIP 40 model already exceeds the threshold.

          Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

          📌 Scroll below for assembly and maintenance guide.

          ELECTROMECHANICAL THERMOMETER WITH FULL ALARM
            FIEM

            ELECTROMECHANICAL THERMOMETER WITH FULL ALARM

            €94.20
            Availability: 103 In Stock

            COMPLETE ELECTROMECHANICAL ALARM THERMOMETER: the original spare part for your incubator.

            Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

            Original Fiem Spare Parts Temperature Probe for ELPT2 Thermostat
              FIEM

              Fiem Temperature Probe for ELPT2 Thermostat

              €14.60
              Availability: 103 In Stock

              Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

              Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

              Perforated Bottom Grid for Fiem Smart / Plasti Flor
                FIEM

                Perforated Bottom Grid for Fiem Smart / Plasti...

                €11.80
                Availability: 999 In Stock

                🥚 The Smart net is not a simple shelf: it is the perforated technical floor that supports the eggs allowing perfect circulation of air and humidity from below!

                At €9.70 (excluding VAT) , the SMART PL. NET (component no. 11 in the exploded view) is the support grid where you place your eggs. Its perforated structure is not random: it allows warm air to circulate evenly from bottom to top and the humidity from the four sectors below to evaporate, reaching the eggs, creating the perfect microclimate essential for embryonic development.

                💨 As the FIEM manual specifies, air circulation is as crucial as temperature. Hot air rises through the mesh, enveloping each egg evenly, while the moisture evaporating from the trays at the base passes through the grill, maintaining the proper 47-62% ratio needed for the various stages.

                ⚠️ When should you replace it? If the mesh is broken or warped, compromising the egg holder, if the plastic is bent, creating unevenness, if it's clogged with debris blocking airflow, or after several cycles, when thorough cleaning is required.

                💡 The mesh size is designed to hold eggs of various sizes (from quail to goose), always ensuring optimal airflow and humidity. Without this perforated grid, you wouldn't have the necessary ventilation!

                ✅ Compatible exclusively with the Smart model . Specific dimensions and design to fit perfectly into the structure.

                📱 Not sure about your network conditions? Send photos on WhatsApp for instant verification.

                🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , components designed for professional results. 24-month warranty for private individuals, 12 VAT numbers.

                FIEM 3-membrane ultrasonic humidifier
                  FIEM

                  FIEM 3-membrane ultrasonic humidifier

                  €199.00
                  Availability: 103 In Stock

                  Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.

                  Lid for Fiem MG and Astrale series humidity trays
                    FIEM

                    Lid for Fiem MG and Astrale series humidity trays

                    €3.17
                    Availability: 198 In Stock

                    The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
                    🔧 Original Fiem steel spare part 14x9 cm
                    ✅ Compatible with MG and Astrale
                    🛠️ Useful in high humidity conditions

                    Original Fiem Spare Parts Protective Net for Cip Cip 28 Fan
                      FIEM

                      Fiem MG50 Incubator Q10 Fan Protection Net

                      €18.00
                      Availability: 103 In Stock

                      Original Fiem Spare Parts: Protective Net for Q10 Fan, Fiem MG50 Incubator  

                      Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

                      Questo sito utilizza cookie per garantire una navigazione ottimale.