Fiem 12/220v transformer

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

✅ Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.