38x35 cm Metal Hatcher Tray - Compatible with Fiem MG70/100/150/140/200 Incubators - Original Fiem Spare Parts

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

🌡️ The digital thermostat is not a simple regulator: it is the electronic brain that maintains temperature and humidity with surgical precision, determining the life or death of your embryos!

At €57.00 (excluding VAT) , the DIG.SMART (part no. 7 in the exploded view) is the intelligent heart of your incubator. With a 3-digit digital display, it controls both temperature and humidity (T/H) with precision to the nearest tenth of a degree. It's not comparable to old analog thermostats: this is precise digital control that maintains a vital 37.7°C without lethal fluctuations.

🎯 As specified in the FIEM manual, pressing SET accesses the reference values, and using the up/down arrows adjusts the temperature (100°F) and humidity (47-62%). The display alternates between current temperature, humidity, and setpoint. This digital precision is the difference between hobbyists and professionals!

⚠️ When should you replace it? If the display doesn't light up or flashes, if the temperature fluctuates excessively, if it doesn't maintain setpoints, if the buttons don't respond (try the MEMB.TAST.DIG membrane first), or after years of technological upgrades.

💡 An inaccurate thermostat causes fatal temperature changes: at 36°C, embryos slow down; at 39°C, they die. Digital thermostats maintain accuracy of ±0.1°C!

✅ Specific for Smart , digital version with integrated T/H control.

📱 Temperature issues? Send WhatsApp photos of the display and readings.

🚚 Ships from Como in 1 day. No minimum order. FIEM since 1975 , digital precision for professional results. 24-month warranty for private individuals, 12 VAT numbers.

🔄 The complete 117/E gearmotor is not just a motor: it is the ready-to-use kit with cams, joint and screws, all FIEM calibrated for immediate installation and perfect voltage!

At €45.58 excluding VAT , the 117/E gearmotor specifically for Smart includes everything you need: motor, transmission cams, connecting joint, and fixing screws. You don't have to search for compatible parts or worry about whether the joint is right—everything is included and pre-assembled to work perfectly together.

⚙️ The difference from the basic 117/F, which costs €44 excluding VAT? This includes the cams and joint already installed, calibrated for the precise 30-minute forward and 30-minute backward movement that replicates a brooding hen. As the FIEM manual indicates, this constant movement is vital to prevent the embryo from adhering to the shell. For €1.58, you'll have the peace of mind of a completely new replacement.

⚠️ When should you replace it? If the voltage is no longer working, if you hear gear noises, if the movement is irregular, if the cams or joints are worn, or if you're completely overhauling the system after years of use.

💡 The advantage of the complete kit: no doubts about part compatibility, faster installation, everything pre-assembled and FIEM tested. Ideal for those who want guaranteed operation!

✅ Specific for Smart model as indicated in the description.

📱 Want to upgrade your entire voltage system? Contact us on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , complete kits for total peace of mind. 24-month warranty for private individuals, 12 VAT numbers.

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!

At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.

⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.

⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.

💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!

✅ Compatible exclusively with Smart as indicated in the price list.

📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.

🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!

At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.

⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.

🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.

⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.

✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.

📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.

🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.