230mm DIAM. ALUMINUM FAN (MG100-COSMO-140-316H)
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG140/200 Incubator
Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts
Do you really want to maximize the performance of your incubator?
With the Guide to Control and Calibration with the Fiem Check-Up Precision Digital Thermometer , you will have in your hands one of the most powerful tools for obtaining reliable and consistent results .
📏 Why is it essential?
Because every degree counts. Correct calibration is what makes the difference between a successful hatch and a failed cycle. With this guide, you'll learn step-by-step how to check and correct any temperature deviations , thus consistently achieving an ideal environment for embryonic development.
✅ Perfect for:
✔️ Professional breeders and demanding hobbyists
✔️ Those who want maximum precision and control
✔️ Those who use FIEM incubators and want to get the best out of every cycle
📘 Inside you will find:
✔️ The fundamental principles of thermal calibration
✔️ Detailed instructions for using the Check-Up Fiem digital thermometer
✔️ Practical tips for professional temperature control
🎁 How to receive it?
Free upon request with the purchase of a FIEM incubator or Check-Up thermometer
Offer valid for orders made by bank transfer, cash on delivery, Postapay top-up, or Satispay .
Free license , reserved for Padovan Avicoltura customers. (Subject to acceptance of confidentiality requirements)
💡 The secret to successful incubation? It's measuring, calibrating, and perfecting . With this guide, nothing will be left to chance.
500W nickel-chrome heating element (Fiem original spare parts)
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Solid State Relay MP 240 D4 Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to always keep your incubator efficient, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG100/150 Incubator
Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.
Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.
Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.
📋 Exploded view ref.: n. 14
📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.
⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.
Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586
📌 Scroll below for a complete technical guide, compatibility, and calibration.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🪟 The transparent window that lets you check without opening.
When it has cracks, clouding or warping, you lose visibility and risk heat and humidity losses.
Quick diagnosis: opaque PVC, cracks, door that doesn't close tightly, or warping. Every opening disrupts critical parameters.
Solution: FIEM transparent PVC door for CIP 28 and 40. Watertight and maximum visibility. Lifespan: 6–8 years.
📌 Real case: Treviso breeder with CIP 40, door warped and unable to maintain proper humidity. Replaced, humidity perfect, hatching improved.
⚠️ When to replace: at the first signs of clouding. Opening the egg frequently reduces hatching.
Essential data:
💶 Price:
• CIP CIP 28: €13.00 + VAT
• CIP CIP 40: €19.50 + VAT
🔧 Compatibility: CIP CIP 28 or 40
🏷️ Code: PVC DOOR CIP 28/40
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Any doubts? Photo of the tag on WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT (CIP 28 model), reach the minimum amount by adding additional items. The CIP 40 model already exceeds the threshold.
Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.
📌 Scroll below for assembly and maintenance guide.
Original spare parts for Fiem incubators from Padovan Avicoltura : COSMO double silicone heating element, 2.06 m (Original Fiem spare parts) . Being able to count on a spare parts supply service is essential and makes the difference, adding value to the service provided by PadovanAvicoltura.
RESIST. DOUBLE SILICONE 2.06 m (COSMO) 210W/ 245 OHM / MT
⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!
At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.
🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!
⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.
💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!
✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.
📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.
🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.
200W nickel-chrome heating element (Fiem original spare parts)
A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.
When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.
Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam
💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.
Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.
⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).
Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.
Original Fiem Spare Parts : Metal drawer for hatching, 38x35 cm; lowered, suitable for the incubation and hatching section of the Fiem MG70/100 incubator. Capacity: approximately 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs.
Above only the first drawer at the top add a lid (code 207/2)
See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.
Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.
Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.
📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.
⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).
Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como
Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT excl.)
Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.
📌 Scroll below for a complete guide, compatibility, and installation.
FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.
Original Fiem spare parts : Plastic cover for hatching drawer Fiem MG244-316-300-320 incubator S316 hatching
To be combined with plastic hatching drawer (code CASS.56020001)
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
Italiano
Deutsch
Español
Français
