Anti-Vibration Metal Supports for CIP 28 and 40 Fan Motors

🌡️ The digital thermostat is not a simple regulator: it is the electronic brain that maintains temperature and humidity with surgical precision, determining the life or death of your embryos!

At €57.00 (excluding VAT) , the DIG.SMART (part no. 7 in the exploded view) is the intelligent heart of your incubator. With a 3-digit digital display, it controls both temperature and humidity (T/H) with precision to the nearest tenth of a degree. It's not comparable to old analog thermostats: this is precise digital control that maintains a vital 37.7°C without lethal fluctuations.

🎯 As specified in the FIEM manual, pressing SET accesses the reference values, and using the up/down arrows adjusts the temperature (100°F) and humidity (47-62%). The display alternates between current temperature, humidity, and setpoint. This digital precision is the difference between hobbyists and professionals!

⚠️ When should you replace it? If the display doesn't light up or flashes, if the temperature fluctuates excessively, if it doesn't maintain setpoints, if the buttons don't respond (try the MEMB.TAST.DIG membrane first), or after years of technological upgrades.

💡 An inaccurate thermostat causes fatal temperature changes: at 36°C, embryos slow down; at 39°C, they die. Digital thermostats maintain accuracy of ±0.1°C!

✅ Specific for Smart , digital version with integrated T/H control.

📱 Temperature issues? Send WhatsApp photos of the display and readings.

🚚 Ships from Como in 1 day. No minimum order. FIEM since 1975 , digital precision for professional results. 24-month warranty for private individuals, 12 VAT numbers.

⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!

At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.

🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!

⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.

💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.

✅ Compatible with all Smart and CipCip models with standard European 230V power supply.

📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.

🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.