Single ventilation speed variator

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

PLASTIC FLOOR - FIEM SMART INCUBATOR

plexiglass door cip cip 40

New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).

When are they needed? When replacing the R75E resistor, it's essential to check the condition of the collars. If they're worn, broken, or missing, they should be replaced along with the resistor.

💰 Price: €1.58 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Add R75E resistor (€12.18) + fuse (€0.42) + thermometer (€22.05) for a complete maintenance kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 350W Armored Heating Element (MG540-432-576). We rely exclusively on original spare parts from the manufacturers of each product, ensuring you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and safety risks.

Original Fiem Spare Parts : Incubation Basket for GOOSE measuring 38x35 cm.

Capacity approximately 9 goose eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to request information or clarification directly via WhatsApp? Click HERE (WHATSAPP).

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Armored heating element 250 W + 350 W (MG720-1000-1150h) 2 pieces (Original Fiem Spare Parts) We rely only and exclusively on original spare parts from the manufacturers of each product, so that you do not have to resort to non-original spare parts that could compromise the correct functioning of your product and consequently cause irreparable damage and risks to your safety.

Original Spare Parts for Fiem Incubators : 38x45 cm metal hatching tray for the hatching compartment on the Fiem MG 100/150 (old model) and Fiem MG 140/200 (old model) incubators. The plastic tray is not suitable for models released after 2020. If you want to add a hatching tray to the incubation compartment, use the 38x35 cm tray.

For the incubation department, take the 38x35 model (code 56) or for the post 2020 model the plastic boxes (code cass.plast.100)

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

Original Fiem spare parts: 2 UF capacitor with cable for A4E300 fan

Kit to convert your Fiem mg 100/150 incubator from weekly to single-batch. You can choose the specific incubation tray for each breed during the purchase process by specifying in the notes. (Universal, geese, quail, pheasant).

Only at Padovan Avicoltura can you find all original Fiem spare parts.

FIEM square net mat for breeder (pheasant-partridge) dimensions 50x100 cm, 5x5 mm mesh.

Original Fiem spare parts: square mesh mat, 50x100 cm, 5x5 mm mesh, perfect for raising pheasants and partridges. Guarantees maximum strength and durability.

Please carefully check that the required part matches the image provided. If you have any questions or are having trouble finding the part you need, please send us a photo of the part you need via WhatsApp. Thank you.