Transformation Kit for MG 100/150 and 140/200 Incubators from Weekly to Single Charge

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

Original Fiem spare parts from Padovan Avicoltura : Digital thermostat for Fiem Smart incubator + sensor.  Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

Universal Compatibility:

Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

NEW FAN complete with fan (MG300/316/320/316H)

MOTOVENT.10W-220V Monophase (MG100-Cosmo-MG140) COD.M4Q045CA0375

ATTENTION: PRODUCT DISCONTINUED

The original Fiem control unit is no longer available. It has been replaced by the manufacturer with an upgrade kit that includes the new control unit and specific wiring harness for the adaptation.

[Link to the new replacement kit]

ADVICE BEFORE PURCHASE

Since this is a repair on incubators that have been in service for many years, we recommend carefully evaluating the overall condition of the machine. Consider whether repair costs are the most cost-effective option in the long run, or whether investing in replacing the entire incubator is more cost-effective.

The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.

✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.

✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

Original Fiem spare parts from Padovan Avicoltura : Gearmotor (MG244-316) for complete Fiem egg turners