Original Fiem Spare Parts : Metal drawer for hatching, 38x35 cm; lowered, suitable for the incubation and hatching section of the Fiem MG70/100 incubator. Capacity: approximately 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs.
Above only the first drawer at the top add a lid (code 207/2)
See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Trust PadovanAvicoltura, with 40 years of experience at your service. Only Made in Italy incubators and original spare parts.
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Is your Fiem incubator/product not working properly? Are some parts broken? Do you need replacement parts? Find the part you need here using the photos. Order it and you'll have your original Fiem accessory or spare part delivered to your door in 3 days.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Ultrasonic humidifier water filter
The kit includes an IEC socket, power cables, and fastons. This work must be performed by a qualified electrician.
When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.
Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.
Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.
Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.
💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.
Compatibility: Universal - works with any forced-air or still-air incubator
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛏️ The floor that lets the eggs breathe from below.
The COSMO base mesh is the perforated surface on which the eggs rest. It allows warm air and humidity to rise from the trays below, ensuring even distribution throughout the incubation chamber.
Quick diagnosis: rusty netting, broken or loosened meshes, bent or deformed netting, eggs that do not sit securely.
Solution: Original FIEM expanded mesh base for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer in Rovigo with a COSMO EVO had a rusty base net after 7 years. The eggs were no longer stable, and some had broken during the hatching process. The net was replaced, no broken eggs, and hatching was normal again.
⚠️ When to replace it: If the mesh is rusty, warped, or has broken links, the eggs will no longer sit securely and may be damaged during turning. It's best to replace it immediately.
Essential data:
💶 Price: €16.59 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: BASE NETWORK COS
📋 Exploded view ref.: n. 8
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Original Fiem Spare Parts from Padovan Avicoltura: Victoria/Fiem Professional Plastic Hatcher for MG432-576-720-1300-2500 Incubators
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Original Fiem Spare Parts: Protective Net for Q10 Fan, Fiem MG50 Incubator
Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.
The MG 70-100-140-200-320 gearmotor is an essential component of the automatic egg rotation system in Fiem incubators. Designed to ensure smooth and constant movement, it ensures optimal incubation management , improving hatching rates.
✔ Compatible with MG 70-100-140-200-320 Fiem incubators
✔ Automatic rotation system for perfect incubation
✔ Durable materials for long life and reliable performance
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
The Q12 Fan Protection Net is an essential accessory for protecting the Fiem MG70 incubator fan, preventing accidental contact with the moving blades and improving system safety. Made of resistant materials, it allows optimal ventilation without obstructing airflow.
✔ Compatible with Fiem MG70 incubators
✔ Durable material for long life
✔ Prevents accidental contact with the fan
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing safety and reliability for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
The FIEM 85–110°F precision thermometer, made in Germany, is designed to provide a clearer, simpler, and more immediate temperature reading in incubators. Ideal for everyday use in both professional and amateur settings, it guarantees accuracy and ease of use. Compatible with all FIEM incubators with analog readout, it is a reliable and long-lasting accessory.
✔ Simplified and intuitive temperature reading
✔ Ideal incubation range: 85–110°F
✔ Made in Germany: highest quality and readability
✔ Original Fiem spare part, ready to use
By purchasing this item, you choose reliability, precision, and practicality, improving environmental control in your incubators.
ATTENTION: Please check carefully that the spare part matches the image.
A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."
⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.
When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.
What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.
Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.
💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.
Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.
💡 More info? Read the description below.
Original Fiem Spare Parts from Padovan Avicoltura : Professional Goose Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
EGG TURNING DRAWER + NYLON INSERTS MG50-COLIBRI BIRD FIEM: the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔒 The fuse holder that keeps the contacts always clean and safe.
When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.
Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.
Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.
⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.
Essential data:
💶 Price: €0.63 + VAT (each)
🔧 Compatibility: All FIEM models with standard fuse holder
🏷️ Code: ITWHK52001
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.
📌 Scroll below for compatibility and replacements.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.
Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.
Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.
⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.
Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!
At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.
🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.
⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.
💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!
✅ Specific for Smart , designed to perfectly close the gearmotor compartment.
📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.
Italiano
Deutsch
Español
Français
