Single-pole switch (Fiem original spare parts)

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!

At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.

🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!

📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.

⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.

✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.

📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.

🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.