Original Fiem Replacement Hygrometer Bottle

PLASTIC FLOOR - FIEM SMART INCUBATOR

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

ELECTRONIC FAN MOTOR D.300mm 230V 50-60HZ (G-576)

Original Spare Parts for Fiem Incubators : Power Cable. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

The site allows everyone to make online purchases. For those who wish to purchase offline by submitting their information, we will make the online purchase for you at a small surcharge.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

The rubber air inlet ring is a component designed to ensure optimal airflow regulation in Fiem incubators. This replacement part ensures a perfect fit, preventing leaks and ensuring a stable environment for proper egg incubation. Made of resistant and durable rubber , it ensures long life and easy installation.
By purchasing this product, you choose original Fiem spare parts , compatible with your incubator to maintain high performance and reliability.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK

The 2.00 m / 143W 170 OHM/MT silicone heating cable is an essential component for the correct functioning of the Fiem MG50, MG70, MG100, MG140, MG320 incubators. This heating element ensures uniform heat distribution, ensuring a stable incubation environment for optimal embryo development.

✔ Compatible with Fiem MG50, MG70, MG100, MG140, MG320 incubators
✔ Length 2 meters, power 143W, resistance 170 OHM/MT
✔ Even heating for a constant temperature
✔ Silicone construction for high strength and durability

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.

✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

CONTROL PANEL REAR COVER (COSMO): The original spare part for your incubator. Item no. 13 in the drawing.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.