Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm
    Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm

Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm

Reference: - Brand: FIEM
€129.00
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

16 other products in the same category:

Original Fiem Spare Parts: Humidity tray for Fiem CIP28 incubator, 8 mm.
FIEM

Humidity tray for Fiem CIP28 incubator,...

€1.59
Availability: 995 In Stock
Humidity Tray 350 TOP for CIP CIP 28 – The tray designed to ensure the correct humidification in the CIP CIP 28. Compact and functional, it fits easily into the bottom of the incubator to maintain the optimal humidity level during incubation and hatching.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

SHT31 ML/LCD Humidity Sensor for Fiem Incubators
FIEM

SHT31 Humidity Sensor with Electronic Board and...

€51.85
Availability: 5 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586

📌 Scroll below for a complete technical guide, compatibility, and calibration.

Original Fiem Spare Parts Protective Net for Cip Cip 28 Fan
FIEM

Fiem MG50 Incubator Q10 Fan Protection Net

€18.00
Availability: 103 In Stock

Original Fiem Spare Parts: Protective Net for Q10 Fan, Fiem MG50 Incubator  

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Digital thermostat T/H Fiem Smart Incubator
FIEM

Fiem Smart Precision Digital Thermostat T/H /...

€69.54
Availability: 1000 In Stock

🌡️ The digital thermostat is not a simple regulator: it is the electronic brain that maintains temperature and humidity with surgical precision, determining the life or death of your embryos!

At €57.00 (excluding VAT) , the DIG.SMART (part no. 7 in the exploded view) is the intelligent heart of your incubator. With a 3-digit digital display, it controls both temperature and humidity (T/H) with precision to the nearest tenth of a degree. It's not comparable to old analog thermostats: this is precise digital control that maintains a vital 37.7°C without lethal fluctuations.

🎯 As specified in the FIEM manual, pressing SET accesses the reference values, and using the up/down arrows adjusts the temperature (100°F) and humidity (47-62%). The display alternates between current temperature, humidity, and setpoint. This digital precision is the difference between hobbyists and professionals!

⚠️ When should you replace it? If the display doesn't light up or flashes, if the temperature fluctuates excessively, if it doesn't maintain setpoints, if the buttons don't respond (try the MEMB.TAST.DIG membrane first), or after years of technological upgrades.

💡 An inaccurate thermostat causes fatal temperature changes: at 36°C, embryos slow down; at 39°C, they die. Digital thermostats maintain accuracy of ±0.1°C!

✅ Specific for Smart , digital version with integrated T/H control.

📱 Temperature issues? Send WhatsApp photos of the display and readings.

🚚 Ships from Como in 1 day. No minimum order. FIEM since 1975 , digital precision for professional results. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Royal Cell Carrier - Perfect Protection and Control
  • -€30.00
FIEM

Fiem Carrier for 50 Royal Cells

€499.00 €469.00 -€30.00
Availability: 99 In Stock

The Fiem royal cell transporter is designed to ensure optimal climatic conditions during the transport of royal cells, ensuring simple and reliable operation.

Benefits for the buyer:

  • Optimal protection: The insulated structure maintains a constant temperature, protecting the royal cells during transport.
  • Power Flexibility: Can be powered either by a 12V cigarette lighter socket or an external battery, offering versatility in different situations.
  • Adequate capacity: With two 25-cell carriers, it allows for the simultaneous transport of up to 50 real cells, optimizing operations.
  • Precise Control: The digital temperature controller allows you to set the temperature precisely, ensuring ideal conditions for real cells.
R75C Silicone Heating Element (123W) | Official Replacement for Smart Incubator
FIEM

123W Silicone Heating Element (R75C) for Smart...

€12.08
Availability: 1000 In Stock

🔥 The silicone resistance is not just a heating wire: it is the calibrated thermal heart that keeps your embryos alive with surgical precision!

At €9.90 (excluding VAT) , the R75C resistor (component no. 16 in the exploded view) is the 1.60-meter silicone heating cable specifically for the Smart. With its 245 Ohm/meter and 123W of power, it is designed to generate exactly the heat needed to maintain the vital 37.7°C.

⚡ The silicone lining is no accident: it resists the constant humidity of the incubator, maintains perfect insulation, and withstands years of thermal cycling.

⚠️ When should you replace it? If the temperature no longer reaches 100°F, if you notice blackened spots or burns on the cable, if the silicone insulation is cracked, if the thermostat runs continuously without reaching the temperature, or after several years as a preventative safety measure.

💡 An inefficient heating element isn't just a temperature problem: it consumes more power, stresses the thermostat, and creates dangerous hot spots. For €9.90, it's not worth risking hatching!

✅ Compatible exclusively with Smart as indicated in the price list.

📱 Unstable temperature? Send WhatsApp photos of the display and current resistance.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , thermal precision for perfect hatching. 24-month warranty for private individuals, 12 VAT numbers.

Incubation and Hatching Tray + Adjustable Inserts MG50 Fiem Spare Parts
FIEM

Incubation and Hatching Tray + Adjustable...

€49.00
Availability: 102 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Incubation and hatching drawer + adjustable inserts for Fiem MG50 incubator without egg turner.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS

EGG TURNING TROLLEY (MG50) + ADJUSTABLE INSERTS

Fiem Smart Adhesive Keyboard Membrane / Keyboard Panel
FIEM

Fiem Smart Adhesive Keyboard Membrane /...

€3.40
Availability: 1000 In Stock

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

Support Foot for Fiem Incubators - Original Fiem Spare Parts
FIEM

Support Foot for Fiem Incubators

€0.73
Availability: 185 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🦶 The foot that keeps the machine stable and level.
When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.

Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.

Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.

⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.

Essential data:
💶 Price: €0.60 + VAT (single sale)
🔧 Compatibility: All FIEM models
🏷️ Code: V284
📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.

Any questions? WhatsApp me: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • ✓ 🔍 Precise search for spare parts
  • ✓ ✅ Check component integrity before departure
  • ✓ 📦 Reinforced protective packaging
  • ✓ 📝 Accounting management and tracking

📌 Scroll below for full compatibility and fitment.

Fiem Anti-Condensation Humidity Probe Protection Case
FIEM

Fiem Anti-Condensation Humidity Probe...

€3.54
Availability: 999 In Stock

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

✅ Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.