Incubation and Hatching Tray + Adjustable Inserts MG50 Fiem Spare Parts

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts : Pheasant Incubation Basket, 38x35 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

INFO-WHATSAPP

Original spare parts for Fiem incubators from Padovan Avicoltura : CIP 28-40 heating element - MG 50 silicone steel 2.06 m . Only at Padovan Avicoltura will you find efficient pre- and post-sales service and spare parts guaranteed over time.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem spare parts from Padovan Avicoltura : L-shaped prismatic thermometer - 100°F for Fiem and Victoria incubators

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

Spare Parts and Exotic Options Fiem set of cylindrical inserts (10 pcs.) egg voltage + aluminum trolley MG50 COLIBRI

The new professional and versatile incubation and hatching tray for the MG50 BIRD/COLIBRÌ incubators is specifically designed for incubating exotic and ornamental animal eggs and, thanks to its removable and adjustable segments, can accommodate eggs of a wide variety of sizes. Also available in a professional version.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Spare Parts for Fiem Incubator : MG50 Useful for those who want to avoid dirtying the incubation drawer supplied with the machine.

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

EGG TURNING DRAWER + NYLON INSERTS MG50-COLIBRI BIRD FIEM: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

230mm DIAM. ALUMINUM FAN (MG100-COSMO-140-316H)

POWER SUPPLY 7.0 A-12/220V + cigarette lighter plug (JOLLY25 + PORTABLE NEST): the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.