Italiano
Deutsch
Español
Français
Pagamento: A RATE, Bonifico, PayPal, Carta di Credito, Ricarica PostePay, Pagamento alla Consegna, Satispay ecc.
Power supply for SIR actuator
Reference: ALIM.ATT. - Brand: FIEM
€65.00
Tax included
normalmente 2/4 giorni feriali
Non ci sono ancora recensioni
Power supply for SIR actuator
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
SPEDIZIONE A COSTO FISSO
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
ALIM.ATT.
16 other products in the same category:
Fiem Smart Transparent Lid (Exploded View 14)
€37.20
Availability:
999 In Stock
🔝 The clear lid isn't just a window onto your eggs: it's the thermal barrier that keeps temperature and humidity stable, determining the success of your hatchings!
At €30.50 (excluding VAT) , the Smart Lid (part #14 in the exploded view) is much more than just a clear plastic cover. It's designed to create the perfect climate chamber that maintains a constant 37.7°C and the necessary humidity, while allowing you to observe development without constantly opening the lid.
🌡️ The transparency of the material is no accident: it allows you to visually check the thermometer and eggs without losing heat. Any unnecessary opening can cause fluctuations of 2-3°C, which slows embryonic development, which is why an intact and well-sealed lid is essential.
⚠️ When should you replace it? If it has cracks or breaks, even small ones, that cause heat and moisture leaks. If the plastic is cloudy from years of use and you can't see clearly inside. If it no longer seals tightly, leaving gaps. If it has been deformed by excessive heat or impacts.
🔧 As the manual indicates, during the last two days of hatching, the lid must be kept tightly closed to maintain humidity at 62%. It's tempting to open the lid to watch the chicks hatch, but each opening compromises subsequent hatchings!
✅ Compatible exclusively with the Smart model . The specific design with the correct curvature ensures optimal air circulation studied by FIEM.
📱 Not sure about the condition of your lid? Send us photos of the complete incubator and lid from various angles on WhatsApp .
🚚 Protected shipping from Como in 1 business day. Reinforced packaging to prevent breakage. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.
Special removable drawer for beekeeping...
€48.00
Availability:
102 In Stock
One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Plateau Egg Holder Emu or Nandu FIEM
€46.00
Availability:
103 In Stock
Emu egg tray for FIEM's Ostrich series. Available in a 9-seater version.
Quail Incubation Basket INCUBATION BASKET cm...
€57.70
Availability:
101 In Stock
Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.
Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP
Spare Parts and Exotic Options Fiem 12/230v...
€169.00
Availability:
103 In Stock
Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
Spare Parts and Exotic Options Fiem Timer Light...
€297.00
Availability:
103 In Stock
Spare Parts and Exotic Options Fiem Timer Light Programming + Twilight Sensor
Adjustable egg turning grid for Fiem Cosmo...
€70.64
Availability:
1000 In Stock
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔄 The automatic hand that imitates a hen.
This grid is the heart of the turning system: it houses the inserts that separate the eggs into neat rows and, connected to the gearmotor, makes them roll gently back and forth, just like a hen in her nest.
Quick diagnosis: eggs that do not rotate, bent or deformed grid, inserts that do not stay in place, jerky or incomplete movement.
Solution: Original FIEM Adjustable Insert Egg Turning Grid, specifically for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer in Brescia with a COSMO EVO had the original grid warped after 6 years of intensive use. The eggs no longer rolled evenly, and hatching rates had dropped. He replaced the grid in 10 minutes, and the next cycle brought the hatching rate back to 85%.
⚠️ When to replace it: If you notice warping, cracks, or the inserts no longer staying in place, it's time to replace it. A damaged grid compromises the voltage and drastically reduces hatching rates.
Essential data:
💶 Price: €52.50 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: 1/3/5
📋 Exploded view ref.: n. 1
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
FIEM Ultrasonic Humidifier with 1 Membrane +...
€63.44
Availability:
101 In Stock
Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.
ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H
Front Panel for Miniled, Miniled Advanced, Evo...
€20.25
Availability:
999 In Stock
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane
Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.
Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.
Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks
⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.
Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como
Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586
📌 Scroll below for technical guidance, compatibility chart, and assembly.
Flat Brass Hinge for 40x40 Door for Fiem...
€1.67
Availability:
194 In Stock
The 40x40 brass flat hinge is an essential component for the proper functioning of Fiem incubator doors. Made of durable brass , it ensures a secure and long-lasting closure, preventing deformation and wear over time. Ideal for replacing damaged hinges and restoring full functionality to your incubator.
✔ 40x40mm dimensions for perfect compatibility
✔ Corrosion-resistant brass material
✔ Smooth movement for optimal opening and closing
✔ Easy installation with stable fixing
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
FIEM Limpia 4 Liter Automatic Ultrasonic...
€119.00
€104.00
-€15.00
Availability:
170 In Stock
Constant and professional humidity control with the FIEM Limpia 4-liter humidifier
Designed to optimize humidity management during incubation, the FIEM Limpia ultrasonic humidifier is the ideal choice for those seeking precision, silence, and automation. Thanks to its nebulization system, it ensures a uniform supply of cold steam within the incubator chamber, improving the embryonic development environment and hatching rates.
Perfect for integration with FIEM incubators equipped with a digital control unit for automatic humidity regulation. The 4-liter tank ensures autonomy and operational continuity.
Positive reviews online : Reliable, precise, compact, and quiet. Also appreciated for its easy connection to the compatible Evo Plus and Mini LED Advanced models.
Criticisms found on the web: Some users recommend using only distilled water
Plastic Hatchery Tray 30x40 cm for Fiem...
€13.60
Availability:
77 In Stock
Original Spare Parts for Fiem Incubators : 30x40cm plastic hatching tray suitable for Fiem MG 100/150 Incubator, Fiem MG140/200 Incubator, MG 200/300 (S) . For example use, see second photo. Mesh lid available for purchase separately.
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
see also art. cod. 38 and cod. 56
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.
ECAM 220V timer for egg turning actuator...
€43.00
Availability:
103 In Stock
TIMER ECAM 220V egg turning actuator control (MG432-576-720-1300)
Fiem Anti-Condensation Humidity Probe...
€3.54
Availability:
999 In Stock
💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)
The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.
🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.
⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.
💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!
✅ Compatible with FIEM humidity probes .
📱 Problems with humidity readings? Send photos on WhatsApp
🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.