Fiem tank-float connection pipe, 1.5 m

🔗 The lock that holds the entire incubator together.
The GACOS is the hook with a threaded insert that connects the lower shell to the upper shell. If it breaks or loosens, the two shells will no longer seal properly, and you lose heat and moisture.

Quick diagnosis: shells that do not engage, broken or bent hook, stripped threaded insert, closure that does not hold.

Solution: Original FIEM GACOS for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Treviso with a COSMO EVO had a car that wouldn't close properly and was losing heat. He thought it was an electrical problem, but it was just a broken GACOS. It was replaced in 2 minutes, and the problem was solved for less than 3 euros.

⚠️ When to replace: If the two shells no longer fit securely or you notice any play between the parts, check the GACOS immediately. An imperfect seal disperses heat and moisture.

Essential data:
💶 Price: €2.84 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: GACOS
📋 Exploded view ref.: n. 6
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

🚪 The invisible pin that holds everything in place.
Hinges are the small hinges that allow the transparent door to open and close properly. They seem insignificant, but if they break or become loose, the door won't close properly, and you lose heat and humidity.

Quick diagnosis: door that doesn't close properly, excessive play, broken or bent hinge, door that "falls" to one side.

Solution: Original FIEM door hinge for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Bari with COSMO ML had a door that wouldn't close properly. He thought the door needed replacing, but it was just a broken hinge. Replaced in 5 minutes for less than 2 euros, problem solved.

⚠️ When to replace it: If the door no longer closes properly or you notice excessive play, check the hinges immediately. Improper closure causes heat and humidity to escape, compromising hatching.

Essential data:
💶 Price: €1.47 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: HINGES COS.
📋 Exploded view ref.: n. 3
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586