FIEM Mg 576 - Mg 720 - Mg 1300 Egg turners - 24V DC electric actuator.
FIEM Mg 576 - Mg 720 - Mg 1300 Egg turners - 24V DC electric actuator.
    FIEM Mg 576 - Mg 720 - Mg 1300 Egg turners - 24V DC electric actuator.
    FIEM Mg 576 - Mg 720 - Mg 1300 Egg turners - 24V DC electric actuator.

FIEM Mg 576 - Mg 720 - Mg 1300 Egg turners - 24V DC electric actuator.

Reference: F23 NEW - Brand: FIEM
€235.34
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Electric actuator (SIR) for egg turners, 24V DC. This product is not available in stock but can be ordered.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

F23 NEW

16 other products in the same category:

Anti-Vibration Metal Supports for CIP 28 and 40 Fan Motors
FIEM

Anti-Vibration Metal Supports for CIP 28 and 40...

€1.28
Availability: 996 In Stock
CIP 28 and 40 Metal Fan Motor Brackets – Small but essential. These brackets keep the fan perfectly aligned, ensuring uniform air circulation in the incubation chamber. Without them, abnormal vibrations and noises can compromise thermal stability and therefore hatching success.

A customer from Vicenza called me worried: he could hear a metallic rattling noise from his CIP CIP 40 incubator on the 12th day of incubating pheasant eggs. After checking, we discovered that one of the fan's metal supports had come loose. Once fixed, the machine went silent again, and the hatching was successful.

When are they needed? If you hear abnormal vibrations, metallic noises, or rattling coming from the fan compartment, or if you notice that the fan isn't perfectly centered, the bearings probably need replacing. Even during preventative maintenance , when you replace the fan motor, it's good practice to check the condition of the bearings.

⚠️ Before ordering: Unplug the fan, open the control panel, and visually inspect the brackets for damage, rust, or missing parts. Sometimes, a thorough cleaning of the fan is enough to eliminate the noise.

📸 Not sure? Send us a photo on WhatsApp (incubator open, fan visible): we'll help you determine if the supports are the problem or if there's something else.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private customers / 12 months for VAT number. Since 1975, FIEM has been synonymous with reliability in the poultry sector.

Fiem Cosmo Incubator Mesh Flooring: Keep Your Eggs Safe
FIEM

COSMO Base Network - Expanded Mesh Flooring

€20.24
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The floor that lets the eggs breathe from below.
The COSMO base mesh is the perforated surface on which the eggs rest. It allows warm air and humidity to rise from the trays below, ensuring even distribution throughout the incubation chamber.

Quick diagnosis: rusty netting, broken or loosened meshes, bent or deformed netting, eggs that do not sit securely.

Solution: Original FIEM expanded mesh base for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Rovigo with a COSMO EVO had a rusty base net after 7 years. The eggs were no longer stable, and some had broken during the hatching process. The net was replaced, no broken eggs, and hatching was normal again.

⚠️ When to replace it: If the mesh is rusty, warped, or has broken links, the eggs will no longer sit securely and may be damaged during turning. It's best to replace it immediately.

Essential data:
💶 Price: €16.59 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: BASE NETWORK COS
📋 Exploded view ref.: n. 8
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Front Panel for Miniled, Miniled Advanced, Evo Plus + Graphic Membrane
FIEM

Front Panel for Miniled, Miniled Advanced, Evo...

€20.25
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

📌 Scroll below for technical guidance, compatibility chart, and assembly.

ABS Cover for Fiem Control Panel

ABS Cover for Fiem Control Panel

€21.35
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • ✓ 🔍 Precise search for spare parts
  • ✓ ✅ Check component integrity before departure
  • ✓ 📦 Reinforced protective packaging
  • ✓ 📝 Accounting management and tracking

📌 Scroll below for a complete guide, compatibility, and installation.

Plato Professional Egg Holder 72 Fiem Victoria Professional Eggs
FIEM

Fiem Victoria Professional 72 Egg Poacher

€19.70
Availability: 102 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Power Cable for Automatic Humidification of Fiem Incubators
FIEM

Power Cable for Automatic Humidification of...

€14.23
Availability: 1000 In Stock

🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

230V FIEM MAXIMUM TEMPERATURE ALARM MICRO SWITCH
FIEM

230V FIEM MAXIMUM TEMPERATURE ALARM MICRO SWITCH

€26.90
Availability: 103 In Stock

FIEM 230V MAXIMUM TEMPERATURE ALARM MICRO SWITCH: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Fiem CIP 40 Metal Support for Humidity Channel
FIEM

Fiem CIP 40 Metal Support for Humidity Channel

€6.71
Availability: 999 In Stock
CIP 40 Humidity Channel Metal Support – The bracket that holds the water channel in place. This metal support ensures stability and proper positioning of the humidity tray on the bottom of the incubator.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.