230V FIEM MAXIMUM TEMPERATURE ALARM MICRO SWITCH

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for a complete technical guide, compatibility, and calibration.

500W nickel-chrome heating element (Fiem original spare parts)

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (Inca - MG50 - MG70 - Maya - MG100 - MG140) diameter mm 20X4h Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.

✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Spare Parts and Exotic Options Fiem Timer Programming Working Temperature or Lights

The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.

✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models

By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.

ATTENTION: Please check carefully that the spare part matches the image.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (MG 200 - MG 244 - MG316 ) cm 37x5 h6. Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original spare parts for Fiem incubators from Padovan Avicoltura : 500 W armored heating element - (MG800H). Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Fiem spare parts : 30x50 cm mesh lid for hatching drawer in the incubation section of the Fiem MG244-316-432-576-720 incubator

To be combined with hatching drawer (code 0087)

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

MESH LID cm30X50 HATCHING DRAWER (MG244-316-432-576-720)

Q10 mesh shelf with stainless steel frame for drying pollen: efficient solution for maximum quality in incubation, original Fiem spare parts.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

The rubber air inlet ring is a component designed to ensure optimal airflow regulation in Fiem incubators. This replacement part ensures a perfect fit, preventing leaks and ensuring a stable environment for proper egg incubation. Made of resistant and durable rubber , it ensures long life and easy installation.
By purchasing this product, you choose original Fiem spare parts , compatible with your incubator to maintain high performance and reliability.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
🔧 Original Fiem steel spare part 14x9 cm
✅ Compatible with MG and Astrale
🛠️ Useful in high humidity conditions

METAL DAMPER FOR CO2 EXPULSION ORIGINAL FIEM SPARE PARTS

The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.

✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :