Power Cable for Automatic Humidification of Fiem Incubators

💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!

At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.

🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!

📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.

⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.

✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.

📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.

🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.